Results 1 to 10 of 25

Thread: M/T Drag Radial's are the

Hybrid View

  1. #1
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248

    M/T Drag Radial's are the

    chitsss!

    I honstly hated on these tires since they are not forgiving to people like me who cant launch on Drag Radial's! Well, I was running on M/T ET Street till I almost lost control of the car and every since then, I have ran on these DR's...Normally the sway on the ET Street never troubled me one bit, but when there is so much dirt & possible water on the track, travelling around 80mph is freaky!

    1st run I did get wheel hop...but not major...after that, these tires are sweet!


  2. #2
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    upps. Run's were made at LACR which is a 2710' elevated drag strip.

  3. #3
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    60's look pretty good.
    I have my 16" ET Streets on diamond racing wheels coming.

    Quote Originally Posted by P Machy View Post
    chitsss!

    I honstly hated on these tires since they are not forgiving to people like me who cant launch on Drag Radial's! Well, I was running on M/T ET Street till I almost lost control of the car and every since then, I have ran on them...Normally the sway never troubled me one bit, but when there is so much dirt & possible water on the track, travelling around 80mph is freaky!

    1st run I did get wheel hop...but not major...after that, these tires are sweet!

    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  4. #4
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    Quote Originally Posted by BurnTire View Post
    60's look pretty good.
    I have my 16" ET Streets on diamond racing wheels coming.
    LOL...thanks for LYING! ....

    I need to hit some 1.5's like a good friend of mine has a few times already on his IRS and same tires!


    Nice...those rims are freaking LITE!

    Hopefully these DR's will last me up to 80 runs....so far 4 runs are down

  5. #5
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by P Machy View Post
    LOL...thanks for LYING! ....

    I need to hit some 1.5's like a good friend of mine has a few times already on his IRS and same tires!


    Nice...those rims are freaking LITE!

    Hopefully these DR's will last me up to 80 runs....so far 4 runs are down
    Well I hear the ET Streets get a little squirrelly when the pressure is run below 14 PSI, but other than that I look forward to something with a little more sidewall flex.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  6. #6
    Senior Member P Machy's Avatar
    Join Date
    Jul 2006
    Location
    So Cal
    Posts
    248
    Quote Originally Posted by BurnTire View Post
    Well I hear the ET Streets get a little squirrelly when the pressure is run below 14 PSI, but other than that I look forward to something with a little more sidewall flex.
    You never ran on them before?

    I used up about 12 or 14 sets of them on the Mach1...naturally Mach1 doesn't haul butt in the MPH, so it wasn't noticeable at all...even with sway bar completely off the car. Ran them as low as 10psi before.

    The Termee was a different story though...just carefull not to give the steering too much input. You are going to feel it, but you can get used to it / Seems like road racers cant over come that feeling.

  7. #7
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Nope Just the BFG's and M/H in the old 5.0 days.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •