Testing Starter Out of Car

[4Jenna]

I'm trying to verify my mom's starter isn't the culprit of her car not starting. My question is with the starter out of the vehicle I gave the starter power and a ground source, I then jumped the small terminal.
The starter gear pops out, but the starter does not turn. I thought the gear should also spin.

Gear pops out, seems like it trys to turn as it makes a loud clack clakc clack noise but gear never turns.

Is this normal?
Checker tested the starter good, but the solenoid portion came back n/a. This starter has the solenoid as one like a sn95 starter.

[Lucafu1]

the starter should pop and spin.

try it again and tap it with a hammer. see if that will get it to spin. actually im seeing a lot of starters going out due the heat.

[fazm]

the starter should pop and spin.

try it again and tap it with a hammer. see if that will get it to spin. actually im seeing a lot of starters going out due the heat.

+1

just had a pt cruiser towed in as i was closing, pretty sure it needs a starter, ill check it in the am

[4Jenna]

I beat it good initially when it was still in the car

[5.0Stanger]

The gear popping out just proves the solenoid is throwing the gear out. It has to send power to spin it, too. Is the starter fairly old?

[4Jenna]

Its stock from 00'

The new starter does the same thing, lol I must be an idiot.

[Lucafu1]

check your ground. if your ground isnt rightorgood enough then thats what it will do.

[5.0Stanger]

check your ground. if your ground isnt rightorgood enough then thats what it will do.

The ground is a possiblilty. Good idea.