face plating a tko 500

[331COUPE]

anyone running a tko 500/600 with gears face plated im sending my tko to liberty trans im tired of missing gears and i have had to replace 3rd gear twice in one month i think tko is a pile of junk
anyone dealt with liberty trans are they any good?

[WildBill]

anyone running a tko 500/600 with gears face plated im sending my tko to liberty trans im tired of missing gears and i have had to replace 3rd gear twice in one month i think tko is a pile of junk
anyone dealt with liberty trans are they any good?

IF you don't drive the car on the street, Liberty and faceplating will be fine.

How much HP and at what rpm are you shifting?

[331COUPE]

420hp shift at 6000 having problem with wanting to go in between 3rd and 5th and then it wipes out 3rd gear and starts grinding would like to go to auto with brake want to start points racing and i do drive on street from time to time

[BurnTire]

Auto is they way to go.

[WildBill]

420hp shift at 6000 having problem with wanting to go in between 3rd and 5th and then it wipes out 3rd gear and starts grinding would like to go to auto with brake want to start points racing and i do drive on street from time to time

A nice C-4 with a t-brake and a stall would be fun!

[331COUPE]

who's trans do you recommend and how much

[WildBill]

who's trans do you recommend and how much

Mike's Transmissions in Cali is great. Dan is a dealer for ATI and PA
You're not to the level for a really big name converter, but Mike's converter guy reverse engineered a Neal Chance converter and it works outstanding.
I bet you could get itno a really nice and CONSISTANT C-4 for around $2400 that can run all season with just fluid changes. and a damn nice converter for roughly $800.
If you want, I can make some calls Monday and see what I can do.
That 420 is N/A or on the bottle?
If I had dyno sheets and an accurate weight, we can pretty much nail the converter on the first try.

[BurnTire]

If you want to have a tranny that doesn't need to be rebuilt after 30-50 runs then get a TH-400. A basic TH-400 with a brake costs about $1,400. After 250 runs you may need to go thru it. You can drive it on the street all day long.

The only downside is it takes more power to turn.

So if you are looking for the best ET then the C-4 may be the way to go if you don't mind pulling it to get freshened up.

If you are looking for a tranny that will low maintenance and good street manners then the Th-400 is the way to go.

I run a Rossler Terminator 3 TH-400. It has all the light weight internals.
I use a 10" converter from Ultimate Convert Concepts.

Mike's makes a good Th-400 also.

[WildBill]

LOL!.........at 420rwhp.....A well built C-4 will last a LONG time, be quicker and a HELL of a lot lighter. I included LOTS of street driving when I made my first post.
A turbo 400 is WAAAAAAY overkill for a 331.

[331COUPE]

its 420 n/a but would like to run nos its on the car just havnt used it need to change gears 4.30 to deep what gears would i need to go to with auto with 28in tire i also need a tune to get rid of rev limiter to run out at 6500