so, after shooting sparks from the left rear on the dyno on saturday, i figured i might have a problem with the caliper spacing after putting in my truetrac diff. well, after pulling off the caliper, i am thankful what i found was my only issue. i could found this out in a much much worse way...

don't think that should be able to be done with the diff cover still on...



yikes!!



not sure how the hell that breaks, but it did! thankfully the caliper bracket retained things in, and kept what coulda been some horrible carnage to a minimum. you can look down the diff tube and see the c clip and the other part of the axle still chillin in there.