Results 1 to 8 of 8

Thread: H or X pipes???

Hybrid View

  1. #1
    Member
    Join Date
    Jul 2008
    Location
    Payson, Arizona
    Posts
    69

    H or X pipes???

    Ok, this is probably a stupid question but here it is:
    My stock exhaust setup looks extremely close the "H" and or the "X" pipe setup, what makes them so different and what are the advantages????
    Looking under my car today while it was up on the rack for an oil change, I looked over my stock Mustang GT's exhaust setup and I didn't see much difference in stock -vs- H or X pipe setups. What is the big deal in changing it out???

    Thanks,
    Keith

  2. #2
    Member billyboss's Avatar
    Join Date
    Nov 2008
    Location
    mesa
    Posts
    97

    H or X pipes???

    I replaced the stock h-pipe on my car with an x-pipe,it just changes the power band is what I noticed,I feel like it lost some torque, but gained some higher rpm power. I don't know if that is what the difference is supposed to be,it also changed the exhaust sound,it actually quieted it down,however the shelby gt's come with an x-pipe instead of the standard gt's h-pipe.and the majority of mustang aftermarket exhaust use an x-pipe,so there must be some advantage to it

    2012 BOSS 302 #0042
    1995 Mustang GTS
    1985 1/2 Mustang SVO
    1977 Granada
    1973 V8 Pinto under construction
    2006 Mustang GT Saleen supercharger11.66@115.84 SOLD
    1996 Mustang COBRA Vortech Supercharger SOLD
    1983 Mustang GT SOLD
    1970 Mustang Mach1 351 Cleveland SOLD
    1965 Mustang 11.90 1/4 miles SOLD
    1970 Mustang Boss 302 Grabber Green w/white interior TOTALED by front end loader
    1968 GT 500 KR Dual Quad/Automatic/A/C SOLD
    1965 Sunbeam Tiger




    11.66@115.84

    2012 Boss302 #42
    851/2 SVO

  3. #3
    Senior Member Blackmagic1's Avatar
    Join Date
    Aug 2006
    Location
    Mesa, AZ
    Posts
    653
    Platinum Award 
    Like BillyBoss said ,a little hp in high rpm's. I personally like the lower,throaty sound of the hpipe/ I believe on the GT500 KR they went with the H and standard GT500 had the X. (Any GT500 owners that can confirm this ?)

  4. #4
    Senior Member El Jefe's Avatar
    Join Date
    Mar 2006
    Location
    Tucson
    Posts
    840
    The H has a crossover pipe that tends to give any exhaust a deeper tone than would an X pipe. X pipes tend to be a little raspy when not catted.

    Your stock pipe is most likely 2.25" and bent in many places and most aftermarkets are 2.5" or 3" mandrel bent thus giving you more power
    04 Screaming Yellow Cobra 463rwhp/456tq
    74 Bronco 302/C4


  5. #5
    Member AODGTVert's Avatar
    Join Date
    Jul 2008
    Location
    Florida
    Posts
    46
    I have the X setup on my 5.0 and I'm not disappointed.

    -89,000 original miles
    - BBK 1 5/8 unequal shorty headers
    -2.5 inch offroad x-pipes w/ 2 chamber flowmasters
    -K&N panel filter, air silencer delete
    -Pro-M 75mm mass air sensor, calibrated for stock injectors
    -65mm Throttle Body and EGR spacer
    -96' Explorer GT-40 intake manifold
    -Explorer 19# injectors
    -Taylor 8.2mm Thunder Volt ignition wires
    -MSD cap and rotor
    -underdrive crank pulley
    -130 amp 3g alternator
    -Smog pump deleted
    -Original 3.27L gears

  6. #6
    I have an O/R X pipe on my 5.0 and I'm EXTREMELY pleased with it. Screams and sounds great.
    1988 GT (BBK 1 5/8th ceramic shorties, BBK O/R X Pipe, SLP LM1 Catback, MSD Blaster Coil II, MSD Pro Billet Distributor, K&N Panel Filter, Weight Reduction, MT ET Streets )

  7. #7
    Senior Member WildBill's Avatar
    Join Date
    Mar 2009
    Location
    Phoenix, DFW or a trailer at the track
    Posts
    944
    ModMotors and old 5.0 engines are different animals. FEW 5.0 can take a REAL advantage of an X-pipe, due to the lower rpm operating range. That's why you almost never see one with an X-pipe.

    The mid pipe in your car is pretty decent flowing, but I'd put a Prochamber mid-pipe and like a Borla XR-1 catback for a VERY sweet sound!

    Remember....Exhaust sound is TOTALLY subjective!
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."
    ΜΟΛΩΝ ΛΑΒΕ

  8. #8
    Member AODGTVert's Avatar
    Join Date
    Jul 2008
    Location
    Florida
    Posts
    46
    ^If I get a valvebody for my aod that shifts at 5,500 at every gear, will that take advantage of the X? I know somebody who makes custom v/b's.

    -89,000 original miles
    - BBK 1 5/8 unequal shorty headers
    -2.5 inch offroad x-pipes w/ 2 chamber flowmasters
    -K&N panel filter, air silencer delete
    -Pro-M 75mm mass air sensor, calibrated for stock injectors
    -65mm Throttle Body and EGR spacer
    -96' Explorer GT-40 intake manifold
    -Explorer 19# injectors
    -Taylor 8.2mm Thunder Volt ignition wires
    -MSD cap and rotor
    -underdrive crank pulley
    -130 amp 3g alternator
    -Smog pump deleted
    -Original 3.27L gears

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •