Sorry for stealing your title andrew......
Went to the old strip today with the new combo...........
Stock 302
ootb tw heads / upgraded springs
AFM b4 = tfs2 cam
Systemax w/ 75 accufab
24lb inj
75 mass
power pipe
Sfi balancer
bbk 1-5/8 long tubes
bbk x pipe
Dyno max bullets
Stock t5 w/ king cobra clutch
4.30 gear / rest stock 8.8
Eibach drag springs four corners with air bag
Race weight 2900 lbs
Only got in two runs due to complications.....
Broke the front tire valve stem some how.... and the breaks will not hold the car and are leaking.
First run was a waste : spun hard off the line
Ran a 11.9 at 116 with a 1.80 60'
Second run read:
1.525 - 60'
4.648 - 330'
7.292 - 1/8
92.54 - mph
9.514 - 1000
106.28 mph
11.5109 ------1/4
116.28------ mph
This run was on a 5500 rpm launch..... Should see some 1.4's with a higher launch
The car will see 11.3's with some more track time....
Have not played with timing or fuel ..... and cant tell where my shift points are at...the stock tach is bouncing everywhere.
Sorry for the far away vid....its all I got
http://usr.imgdp.com/files/dump/keith/11.51at116.wmv
Results 1 to 10 of 10
Thread: New Best Time!!! PT 2
-
03-09-09, 01:04 AM #1Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
New Best Time!!! PT 2
-
03-09-09, 05:10 AM #2Senior Member
- Join Date
- Sep 2006
- Location
- Phoenix
- Posts
- 1,024
Nice man did you beat Andy that run?
-
03-09-09, 07:05 AM #3Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Good run!
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
03-09-09, 11:41 AM #4Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
Only by one second
Originally Posted by ahawkins
-
03-09-09, 12:46 PM #5Senior Member
- Join Date
- Jan 2008
- Location
- Apache Junction AZ.
- Posts
- 159
Nice times...
-
03-09-09, 09:11 PM #6Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
thats gettin it done! nice work man.
-
03-09-09, 09:20 PM #7Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
Thanks you sir..... Originally Posted by AZSonicSnake
Car has 11.3s in her but need a job first ..... roll bar , axles etc etc
I will eventualy have this stock block into the 10's
-
03-09-09, 10:39 PM #8Senior Member
- Join Date
- May 2007
- Location
- Arizona
- Posts
- 200
Thank for stealing my thread....lol
Thanks for the Great picture of my launch...everyone ot to see that one before i did.
I guess you did alright at the track
jlt cai, o/r bassani x-pipe,magna pack cat back, tri-ax, sct tune by keith @ az dyno chip, solid axle w/ 4.10 gears
Best time...12.797 @ 108.5 mph w/ 1.76 60ft
New Best Time....12.3911 @ 106.3 w/ 1.589 60ft
SOLD
New Toy - 2003 GT stroker, procharger and to much other s**t to list ***SOLD***
-
03-11-09, 12:07 PM #9Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
You are correct.... just alright..... Give me money for a cage so I can run 10's Originally Posted by Phx99Cobra
Thank for stealing my thread....lol
Thanks for the Great picture of my launch...everyone ot to see that one before i did.
I guess you did alright at the track
-
03-11-09, 10:15 PM #10Senior Member
- Join Date
- May 2007
- Location
- Arizona
- Posts
- 200
Originally Posted by 93mustank
Before you hit 10's you'll have to worry about that aerodynamic right side
of your car...
jlt cai, o/r bassani x-pipe,magna pack cat back, tri-ax, sct tune by keith @ az dyno chip, solid axle w/ 4.10 gears
Best time...12.797 @ 108.5 mph w/ 1.76 60ft
New Best Time....12.3911 @ 106.3 w/ 1.589 60ft
SOLD
New Toy - 2003 GT stroker, procharger and to much other s**t to list ***SOLD***
Reply With Quote
