Does any one know if S197 10.5" wheels fit a fox body in the rear? or what you need to do to make them fit?
Results 1 to 4 of 4
Thread: s197 wheels on a foxbody
-
02-26-09, 08:26 PM #1Member
- Join Date
- Jan 2009
- Location
- goodyear, arizona
- Posts
- 67
s197 wheels on a foxbody
-
02-26-09, 09:50 PM #2Senior Member
- Join Date
- May 2008
- Location
- Chandler, AZ
- Posts
- 592
Good question I would like to know as well.
2004 Saleen Convertible #298 SC/281-SOLD
1970 Chevelle LS3 Build/T56
-
02-26-09, 10:23 PM #3Senior Member
- Join Date
- Sep 2007
- Location
- Phoenix, Arizona
- Posts
- 538
I am not sure on this but when you use the 94 and up rear axles on a fox the track is wider so the higher offset wheels might work. I believe that the 99 and newer axles are even wider than 94-98.
-
02-26-09, 10:49 PM #4Member
- Join Date
- Sep 2007
- Location
- Phoenix, AZ
- Posts
- 58
Looks like the backspacing on a 18x10 Bullitt is 7.2". The backspacing on a 17x10.5 is 6.8", and I know those are a pretty tight fit, even with the BFH.
Reply With Quote