Got around to upgrading my fuel line today to get my duty cycle in check.
Prior to the swap my duty cycle was 92% at 6000 RPM stock pumps BAP at 50
Now my duty cycle is 85% with the BAP on 50 so I will be able to back the BAP down some for street duty.
Thanks to Jared at Lethal for hooking me up with all the parts.
I followed the stock fuel line, but used a different filter location.
15 feet of Fragola -8an Push-Lite Hose (I had about 1 ft left over)
1- Lethal Performance -8an to Stock Fuel Rail Adapter
2 -Fragola -8an Straight Push-Lite Race Hose End
I decided to attach the filter on the passenger side of the car for easy access.
1 -Aeromotive Billet Fuel Filter (10 Micron Element)
2 -Fittings for fuel filter
2 -Fragola -8an Straight Push-Lite Race Hose End
1 -Fragola -8an Straight Push-Lite Race Hose End
Lethal provided a quick disconnect that coupled with a -8an union fitting. This allows you to connect to the stock hat in a stock manner.
Being the filter is in a different location I didn't have to mess with angled hose ends.
Results 1 to 10 of 18
Thread: -8 Line Upgrade
-
12-18-08, 11:16 PM #1Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
-8 Line Upgrade
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
12-19-08, 08:19 AM #2Senior Member
- Join Date
- Sep 2006
- Location
- Phoenix
- Posts
- 1,663
Looks good.
2012 Race Red GT w/ a 5 Liter and a 6 speed
2010 Dodge Challenger R/T traded in.
'03 DBS Cobra .... Traded in, THANK GOD
'01 Ford Lightning.... Sold, sorely missed
-
12-19-08, 02:16 PM #3Senior Member
- Join Date
- Jul 2007
- Location
- South Florida
- Posts
- 345
Looks great Jeff and thanks for the props!
I've added the upgrade kit to our new website which we'll be launching here in the next week.
Thanks again!
Jared
LETHALDIESEL.COM Coming Soon!
LETHAL PERFORMANCE, INC.
http://www.lethalperformance.com
877-2LETHAL
http://www.myspace.com/lethalperformance
Largest Whipple Distributor in the US
SPEC, RAM & Centerforce Always in STOCK!
You name it, we got it!
-
12-19-08, 02:31 PM #4Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
If there is one thing I would do different it would have been a 45 degree hose end at the hat for easier line routing.
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
12-19-08, 06:22 PM #5Super Moderator
- Join Date
- Apr 2007
- Location
- AZ
- Posts
- 1,939
Nice zip ties!
Looks good Jeff!JENNABEARS Foundation
www.jennabearsfoundation.org
-
12-19-08, 06:29 PM #6Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
LOL. Those are temporary.
Originally Posted by 4Jenna
Nice zip ties!
Looks good Jeff!Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
12-19-08, 08:57 PM #7Super Moderator
- Join Date
- Apr 2007
- Location
- AZ
- Posts
- 1,939
I used these
JENNABEARS Foundation
www.jennabearsfoundation.org
-
12-19-08, 10:31 PM #8Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
I have a bag in the garage. Those are heavy. Zip ties = quicker ET's. Originally Posted by 4Jenna
I used these
Impossible to install in the tunnel when you follow the stock line and the drive shaft is in so the zip ties are there for a while.Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
12-20-08, 03:15 AM #9Super Moderator
- Join Date
- Dec 2005
- Location
- Phoenix
- Posts
- 1,224
what did you end up using to conect the line to the top of the hat?
-
12-20-08, 07:15 AM #10Member
- Join Date
- Apr 2008
- Location
- MI
- Posts
- 43
Looks good. To keep everything "stealth" you should have ordered the Russell fuel rail adapter, cheaper too........
http://store.summitracing.com/partde...5&autoview=sku
--JoeFo Mo Co Mo Fo
Reply With Quote