Lean Problem

[fazm]

how bout the pressure regulator? pull the vacuum hose off of it after you shut it off and see if any gas is coming out.

mass air flow?

[ThePunisher95]

No gas is coming out... And I was thinking it could be the maf but I dont wanna spend 100 bucks and still have the same problem

[Sqrlnts]

What MAF are you using?

[ThePunisher95]

Stock

[fazm]

got anything to log data?

[jjmatheson]

The processor may not have the ability to log data in 91. I dont think this is your problem but check the elements on your maf, make sure its clean. Do you have an adjustable fuel pressure reg.?

[Sqrlnts]

Hope no one takes this the wrong way, but Punisher, if your looking to work more than one avenue at a time try SBFtech.com under Joel 5.0's Electronic Engine Management. There are some sharp cats on that forum.

Oh and, I asked what kinda MAF because I woulda let you try mine.

GL

[BurnTire]

49 all the time?

[ThePunisher95]

Hope no one takes this the wrong way, but Punisher, if your looking to work more than one avenue at a time try SBFtech.com under Joel 5.0's Electronic Engine Management. There are some sharp cats on that forum.

Oh and, I asked what kinda MAF because I woulda let you try mine.

GL

Were you live at?? I would like to use it just to try it out.

[Sqrlnts]

I am in Chandler Elliott and Dobson, my C&L MAF is calibrated for 24lbs injectors.....will probably give your 19's a hard time....