Header bolt ??

[Sqrlnts]

Will be installing my new LT headers this weekend () and am wondering if i should use some FMS stage 8 locking bolts? I have found a set for $45 plus shipping. The LT's are MAC with the individual style flange, not solid like BBK. I have read others just use stock type grade 8 non locking bolts and retorque them after a couple heat cycles and they are fine. My thing is I am switching to the LT's because my shorty headers are consistently leaking and I can't stand that sound. So I don't mind spending some extra coin if it will help in the end.

Your thoughts are appreciated!!!

[jjmatheson]

Yes get locking bolts and use steel header gaskets or copper I just have never used copper. There is a company making the steel gaskets for the Windsor cant remember whom. Make sure whatever header you get has thick flanges so they will not warp.

[Steve2000GT]

I had mac 1 5/8 lt headers on my fox and just used the studs and bolts they sent with. Never had any problems or annoying exhaust leaks.

[Stern90LX]

I prefer using studs and a lock washer under the nut with LT's myself, they won't come undone. Also makes mounting them easier. This applies to the BBK LT's with a solid one piece flange anyway. Should work the same with the MAC's. Just remember to use a Thread Sealant(not to be confused with a thread lock compound) with the studs so they don't seize in the head in case they ever need to be removed.