Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Studs and spacers?

  1. #11
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    You can read all about it here.
    http://www.highperformancestangs.com...ead.php?t=4217

    I dumped the pro stars for wheels that do not cause these issues.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  2. #12
    Senior Member 93mustank's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix.AZ
    Posts
    398
    Quote Originally Posted by BurnTire View Post
    You can read all about it here.
    http://www.highperformancestangs.com...ead.php?t=4217

    I dumped the pro stars for wheels that do not cause these issues.
    Perfect ....thanks

  3. #13
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    looks like i am retarded, it is a 3.5" stud. works good though. i feel confident, even driving them 30 miles to the track. its held up well for the past year. that thread does have all the good info in it...

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  4. #14
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    here's some pics of my setup....





    and with the stock wheels on...


    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  5. #15
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Cliff note version. the prostars use a long 1 3/8" shanked lug nut because the area of rim that the studs has to pass thru is long leaving very little stud protruding past the rim.

    The centerline convo pros use a 1/2" shanked lug allowing much more stud to pass into the hex portion of the lug nut.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  6. #16
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    On my wheels with a 1" spacer the studs go past the end of the lug nuts. Remember the top 1/2" of the ARP studs are not threaded.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  7. #17
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    i plan to pic up different lugs with a shorter nut length, and that will help that out. think i have made 10-12 trips of 30+ miles to the track with this setup, and more than 50 passes with it. so i am not worryin anymore.

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  8. #18
    Senior Member 93mustank's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix.AZ
    Posts
    398
    Good pics.......You pass tech every time with that setup?

    I usually pass with my fox with weld draglites in the front, stock length studs,closed end lug nuts....

    I just tell them they are extended studs but have not bought open end lug nuts......

  9. #19
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by AZSonicSnake View Post
    i plan to pic up different lugs with a shorter nut length, and that will help that out. think i have made 10-12 trips of 30+ miles to the track with this setup, and more than 50 passes with it. so i am not worryin anymore.
    That doesn't really do anything other than make it look better. The lugs could be 2 feet long (curb feelers) and it would be legal as long as there was 1/2" of stud thread engagement in the hex portion of the lug nut.

    The NHRA rule is that you must have lug nut hex head thread engagement equal to the diameter of the stud. We use 1/2" studs so to be completely legal you must have 1/2" of the threaded portion of the stud threaded into 1/2" of the hex portion of the lug nut. The non thread portion of the ARP's does not count for this 1/2".
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  10. #20
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    Quote Originally Posted by 93mustank View Post
    Good pics.......You pass tech every time with that setup?

    I usually pass with my fox with weld draglites in the front, stock length studs,closed end lug nuts....

    I just tell them they are extended studs but have not bought open end lug nuts......
    yes sir, at firebird and speedworld, along with SIR in Tucson. never had a single issue with it.

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •