very cool!! the video took some time to load, but it worked for me. looks like something i need to get done soon.
btw- with it hooked to the clutch switch, wouldn't it be engauged everytime you depress the clutch? i am not 100% understanding how thats gonna work... (yea, i am probably having a blonde moment...)
Results 1 to 10 of 57
Hybrid View
-
10-04-08, 03:12 PM #1Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
-
10-04-08, 03:49 PM #2Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,632
Yes it will, but the RPMs must be 1000 below the set limit to activate.
Originally Posted by AZSonicSnake
So If I set the launch RPMs at 6000 the RPMs would have to drop below 5000 to reactivate the unit so it isn't really an issue.
It sure does hold things nice and smooth. I gave it a good wack one time and could smell raw fuel so there are no lean issue like the stock setup.Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
10-04-08, 04:49 PM #3Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
i don't power shift though, so everytime i left off and clutch it to shift i am gonna be in trouble if i wired it that way, right?
-
10-04-08, 05:04 PM #4Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,632
The setup is only active when the clutch is to the floor. When the clutch is out it is deactivated. I don't understand what your asking? Originally Posted by AZSonicSnake
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
Reply With Quote
