Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Need Help ASAP

  1. #1
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622

    Need Help ASAP

    Going to get Tranny and engine oil + filters and change them all today. Question what kind (brand) thinkness or what do you reccomend for these old cars.
    I will also be adding a quart of lucas to the oil as well

    (69 mustang. 302 v-8 origonal 80,000 mi.)
    tranny i really have no idea...

    filters i am going with fram.

  2. #2
    Senior Member About2Bite's Avatar
    Join Date
    Feb 2008
    Location
    Chandler AZ
    Posts
    504
    Please don't go with Fram
    Black 04 Cobra

    KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
    SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
    2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17


    Quote Originally Posted by wickedcobra View Post
    I have it worked out with my wife too, I get car parts, she gets brooms, vacuum, irons etc....LOL

  3. #3
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622
    why is that

  4. #4
    Senior Member About2Bite's Avatar
    Join Date
    Feb 2008
    Location
    Chandler AZ
    Posts
    504
    They are no good, i've seen tests and read about their quality. I like the grip thing they have and if you get one of their higher end ones i'm sure it'll be fine but I only use Motorcraft in my Cobra. If I were you i'd go with a Mobile 1/Wix/K&N before a Fram

    As far as oil for older cars i'm not sure but Mobile 1 oil is good stuff for over the counter/Auto Zone. In reality though even the WalMart shelf oil is fine for pretty much any motor. I would think 10W30 would be a good weight and as far as tranny fluid I couldn't tell you. I use GM Syncromesh in mine (it requires Dextron II ATF), yours should require something different though.
    Last edited by About2Bite; 08-01-08 at 11:57 AM.
    Black 04 Cobra

    KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
    SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
    2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17


    Quote Originally Posted by wickedcobra View Post
    I have it worked out with my wife too, I get car parts, she gets brooms, vacuum, irons etc....LOL

  5. #5
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622
    K&N is my usual for my truck. but i have only done the oil once in this car. It Desperately needs to be done

  6. #6
    Senior Member FalconGTHO's Avatar
    Join Date
    Jan 2008
    Location
    Scorpion Gulch
    Posts
    549
    Motorcraft FL1-A and if you can afford it, WANT to afford it, Castrol Syntec full syn oil. If not, Valvoline dino oil. Weight? Given the heat out here I use (when I drove it) 20W-50 in my 72 Torino. In the coldest of winter you can switch to 10W-40. I never bothered to in the Torino.

  7. #7
    Super Moderator Jacostang's Avatar
    Join Date
    Jul 2006
    Location
    Mesa, Az
    Posts
    4,443
    Platinum Award 
    Motorcraft filters! I also run 20/50 in my Foxes 5.0 all year round and they both have over 190,000 miles on them.. Fram filters are junk imo... Castrol Oil and in our newer cars Mobil 1 all the time....
    "The choices we make, dictates the lives we lead"


  8. #8
    Senior Member silver03cobra's Avatar
    Join Date
    Sep 2006
    Location
    Glendale
    Posts
    629
    fram is junk!

  9. #9
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622
    i got a K&N high performance filter and then they only carried a fram tranny filter. but i think i tightened the bolts to tight and spread the gasket because it is leaking

  10. #10
    Senior Member 93mustank's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix.AZ
    Posts
    398
    Ya...dont over tighten....it will leak...doesnt take much to snug those bolts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •