Who has bailing wire anywhere on their car? Zip ties don't count cause they actually do a nice job for cable bundles........just good old fashion spool or fence wire?
Results 1 to 10 of 12
Thread: Just admit it!
-
07-26-08, 04:41 AM #1Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
Just admit it!
306 stuffed with ARP bolts, C&L elbow, BBK 70mm TB, 24lbs, typhoon w/1"spacer, Al radiator, F cam, Pro Form 1.6 RR, MAC long tubes, offroad H, 40 series Flows, TKO500, Steeda clutch quad, Hurst shifter, King Cobra clutch, 3:73 gears, poly motor mounts, 17" Repop Cobra R's with shit tires.
-
07-26-08, 05:16 AM #2Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
Ok, chickens. Let me start. I have wire holding a broken EGR bracket off the header, holding my X pipe instead of the hangers,..........got it somewhere else just can't remember.
Comon, fess up306 stuffed with ARP bolts, C&L elbow, BBK 70mm TB, 24lbs, typhoon w/1"spacer, Al radiator, F cam, Pro Form 1.6 RR, MAC long tubes, offroad H, 40 series Flows, TKO500, Steeda clutch quad, Hurst shifter, King Cobra clutch, 3:73 gears, poly motor mounts, 17" Repop Cobra R's with shit tires.
-
07-26-08, 07:53 AM #3Senior Member
- Join Date
- Mar 2008
- Location
- Phoenix , AZ
- Posts
- 251
Originally Posted by Sqrlnts
Nice !!!! Sorry I checked just don't have any anywhere.
93 FOX
-
07-26-08, 12:14 PM #4Senior Member
- Join Date
- Feb 2008
- Location
- Chandler AZ
- Posts
- 504
None here either
Black 04 Cobra
KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17
Originally Posted by wickedcobra
-
07-26-08, 12:50 PM #5Senior Member
- Join Date
- Oct 2007
- Location
- Atlanta
- Posts
- 642
none here either but I had a 65 stang that I had to hold up the exhaust just behind the right manifold up with a coat hanger after it popped out.
-
07-26-08, 01:32 PM #6Senior Member
- Join Date
- Nov 2006
- Location
- Scottsdale
- Posts
- 750
HAHA this thread is awesome! I had some on the ol Galaxie back in HS, but think I'm free of the wire right now, at least I hope so.
2011 Shelby GT 500
Black/Black/Satin Black Stripes, Electronics Pkg, FRPP/BMR Suspension/Borla-Ford Racing Exhaust
488rwhp/463rwtq bone stock
Great Past Rides:
2003 Mustang Cobra SVT Convertible- 302 Stroker & more- PSR Tuned, 2003 Mustang GT- Silver Coupe w/boltons
1996 Mustang GT/SC- Paxton SC & Tons of Mods- SuperFord Mag Car, 1995 Mustang- Red w/boltons. 1968 Galaxie 500
-
07-26-08, 01:39 PM #7Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
lol...none here....hows the car running Sqrlnts ? Does it still drive?
-
07-26-08, 05:02 PM #8Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
glad you asked. Get this. So my engine builder told me it was possible that the head gasket lifted on the dyno and then resealed. He said it happens especially when things get hot and overheated. I left AZDynoChip with my dyno sheet in hand that read 215 HP!! Originally Posted by 93mustank
In the following days driving the car around i noticed that it felt like it had a miss every now and again, but it never overheated again. I opened the hood last night to adjust my idle down and while doing that accidentally bumped one of the spark plug wires........saw about 6 blue flashes......
whats this I say. I shut it off and look at the wire. Its burned but not all the way through. Replaced the plug wire and this engine is a different animal. 
I think that while driving around slowly everything ran fine, its just that when alot of wind came through the engine compartment it was blowing the plug wire against the header causing the miss.
Soooooo, I gotta say, this thing flat out moves. I am still trying to get used to shifting the TKO. Little more practice and I want to get it to the track to thrash on it.
Seriously no one else has bailing wire on their car? Hmmmmm, must be a Kansas thing!!
306 stuffed with ARP bolts, C&L elbow, BBK 70mm TB, 24lbs, typhoon w/1"spacer, Al radiator, F cam, Pro Form 1.6 RR, MAC long tubes, offroad H, 40 series Flows, TKO500, Steeda clutch quad, Hurst shifter, King Cobra clutch, 3:73 gears, poly motor mounts, 17" Repop Cobra R's with shit tires.
-
07-26-08, 05:04 PM #9Super Moderator
- Join Date
- Jul 2006
- Location
- Mesa, Az
- Posts
- 4,443
Sorry no wire as of right now!!
"The choices we make, dictates the lives we lead"
-
07-26-08, 05:13 PM #10Senior Member
- Join Date
- Sep 2006
- Location
- Gilbert AZ
- Posts
- 851
Nope...nada...nix...none...nipper....not even....nein...non...and 没有
Reply With Quote
