Just wanted to say, I just completed the 3G alt upgrade on my car to include adding the additional mega fuse and 4 gauge power wire. This mod was much simpler than everyone makes it out to be, or maybe I just got luckyAnyway, if anyone needs help doing this don't hesitate to get ahold of me
Results 1 to 10 of 16
-
07-24-08, 01:03 PM #1Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
3G alternator upgrade......... no sweat
-
07-24-08, 01:31 PM #2Senior Member
- Join Date
- Nov 2006
- Location
- Phoenix.AZ
- Posts
- 398
Where did you buy your fuse. I have the upgrade with no fuse.
-
07-24-08, 02:08 PM #3Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
Mobile Audio
(480) 545-5087
3050 S Country Club Dr, Ste 9, Mesa, AZ 85210
Cross Streets: Between W Pantera Ave and E Tremaine Dr
Fuse was a 200 amp stereo type fuse, cost for fuse holder and 2 fuses was around $20.
-
07-24-08, 02:27 PM #4Super Moderator
- Join Date
- Apr 2007
- Location
- AZ
- Posts
- 1,939
I got a nice 200amp fuse kit with 4g off ebay for really cheap when I did mine.
Trimming the bracket was the only thing I didnt like doing.JENNABEARS Foundation
www.jennabearsfoundation.org
-
07-24-08, 02:37 PM #5Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
Trimming the bracket is probably the toughest part. It can be trimmed out quite nicely with an angle grinder and finished up with a dremel tool.
-
08-27-08, 06:02 AM #6Junior Member
- Join Date
- Apr 2008
- Location
- Dacula, GA
- Posts
- 1
You can get the harnesses premade with fuses and any other harnesses that you need from rjminjection. Cost around 60.00 for both the battery harness with fuse and alternator harness.
-
08-27-08, 11:33 AM #7Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
sounds a little high to me. Just run the parts down yourself and you can keep half that amount in your pocket.
Originally Posted by droptop91
306 stuffed with ARP bolts, C&L elbow, BBK 70mm TB, 24lbs, typhoon w/1"spacer, Al radiator, F cam, Pro Form 1.6 RR, MAC long tubes, offroad H, 40 series Flows, TKO500, Steeda clutch quad, Hurst shifter, King Cobra clutch, 3:73 gears, poly motor mounts, 17" Repop Cobra R's with shit tires.
-
08-31-08, 03:52 AM #8Senior Member
- Join Date
- Sep 2006
- Location
- Prescott Valley, AZ
- Posts
- 111
Yup, 3G conversion is a piece of cake on the Fox. Although I kinda cheated. I bought a PA Performance 150A 3G Small Case HO. No grinding required.
The Pony Car Wars are over... The Mustang Won
-
09-01-08, 03:16 PM #9Super Moderator
- Join Date
- Jul 2006
- Location
- Mesa, Az
- Posts
- 4,443
I need this for my 89 rignt now...
"The choices we make, dictates the lives we lead"
-
09-03-08, 02:12 PM #10Senior Member
- Join Date
- Aug 2006
- Location
- Chandler AZ
- Posts
- 243
I have a kick ass link at home. I will post it up tonight. What exactly do you need help with?
306 stuffed with ARP bolts, C&L elbow, BBK 70mm TB, 24lbs, typhoon w/1"spacer, Al radiator, F cam, Pro Form 1.6 RR, MAC long tubes, offroad H, 40 series Flows, TKO500, Steeda clutch quad, Hurst shifter, King Cobra clutch, 3:73 gears, poly motor mounts, 17" Repop Cobra R's with shit tires.
Reply With Quote