ok help what do i topque the 03 flywheel to on my 99 cobra
Results 1 to 6 of 6
Thread: flywheel torque 03 to 99
-
05-14-06, 10:32 PM #1Junior Member
- Join Date
- Mar 2006
- Posts
- 7
flywheel torque 03 to 99
-
05-14-06, 11:00 PM #2Senior Member
- Join Date
- Dec 2005
- Location
- AZ
- Posts
- 770
Torque spec?
Call Akuma or Dan I know they have the manuals.
-
05-15-06, 04:18 AM #3Senior Member
- Join Date
- Dec 2005
- Location
- Tucson
- Posts
- 542
tight, worked for me for years
-
05-15-06, 09:29 AM #4Senior Member
- Join Date
- Dec 2005
- Location
- AZ
- Posts
- 770
gudentight...(german torque spec)
-
05-15-06, 02:32 PM #5Senior Member
- Join Date
- Dec 2005
- Location
- Tucson
- Posts
- 542
exactly!
Originally Posted by 50 BMG
gudentight...(german torque spec)
but after working on acft/helos for 6 years my arm is always calibrated
-
05-15-06, 03:29 PM #6Mini Cooper
- Join Date
- Dec 2005
- Location
- Cave Creek
- Posts
- 181
This should cover everything..
"Syncromesh Transmission Fluid - Friction Modifier" GM part #12377916
DEXRON III? (ATF) Transmission Fluid
XT-2-QDX DEXRON III?
Pressure plate-to-flywheel bolts 4.6L (4V) 33 lb-ft + 60?
Transmission to clutch adapter housing bolts 26 lb-ft
bellhousing-to-block bolts are torqued to 55 ft/lbs.
PP bolts to like 25-30 ft-lbs
Flywheel to crank ---- 63 ft lbs
PP to flywheel ------- 33 ft lbs plus 60 degrees more
Bellhousing to block--- 55 ft lbs
Trans to bellhousing -- 26 ft lbs
Trans front cover ---- 26 ft lbs could be called adapter, or input shaft
retainer (removed to change input shaft)
Trans rear ext hsing -- 26 ft lbs
I German torque everything.........Good-en-tite
Reply With Quote