Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: Sticky Tires????

  1. #11
    Senior Member wickedcobra's Avatar
    Join Date
    Aug 2007
    Location
    QC/Gilbert
    Posts
    1,405
    Gold Award 
    Then the following Friday

  2. #12
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    yeah, you get a little sway, but its not that bad. it will surprise you the first time, but you quickly get use to it.

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  3. #13
    Senior Member chewbaccajones's Avatar
    Join Date
    Oct 2007
    Location
    Atlanta
    Posts
    642
    Gold Award 
    Whoah! What speed does the sway stop? You're not still swaying at 110mph are you?

  4. #14
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    If you have radials on the front and bias ply on the rear it is going to sway the entire run.

    If you have bias ply on the front and back like me you don't get massive sway.

    Sway is not bad, it just takes a few runs to get the hang of the rear end floating around.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  5. #15
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    roger that. i run a radial out front because i have not found a dot legal front tire that is bias ply. and i run in a class that requires dot tires. and luckily et streets are dot legal.

    but as for sway, the main time i notice it is between shifts. otherwise, its nothing horrible. and jeff is 100% right, it does it the full length of the track. i love it when i shift 3-4, thats good stuff!! the traction you get though, far outweighs that slingt annoyance.

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  6. #16
    Senior Member wickedcobra's Avatar
    Join Date
    Aug 2007
    Location
    QC/Gilbert
    Posts
    1,405
    Gold Award 
    Thats gonna be fun rolling at the end of the 1320 at 125+ YEEE HAW

  7. #17
    Senior Member fazm's Avatar
    Join Date
    Nov 2006
    Location
    gilbert, AZ
    Posts
    1,028
    Platinum Award 
    ya the worste part of the sway for me was letting off the throttle after the 1320' and getting onto the brakes. going down the track didnt bug me at all, just finishing lol.

    i dont get the sway until i go under 23psi in the slicks (which ive only done a couple times, and resulted in broken parts lol)
    2005 v6 redfire mustang. yup its slow.
    12.03 @ 118.5 best et
    12.11 @ 122.0 best mph

  8. #18
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    I run 9-10 psi on the slicks.

    14.5 worked well on the 26" ET Streets.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  9. #19
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    same here for slicks 9-11 dependin on the track. and et streets tend to love anything in the 14 range...

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  10. #20
    Senior Member wickedcobra's Avatar
    Join Date
    Aug 2007
    Location
    QC/Gilbert
    Posts
    1,405
    Gold Award 
    I will start out higher then work my way down just to get the feel for it.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •