MRC Anti Roll Bar question

[soap]

Anyone want to offer some input on them?? I know Jeff has one, anyone else??

My main concern is if there were ANY exhaust modifications necessary to install it. I have the standard Magnaflow 2.5" catback for 99-04's.

Thanks.

--Joe

[BurnTire]

Clears exhaust with with no problems.
It hangs about as low as a stock swaybar.
Fine on the street.

[soap]

Clears exhaust with with no problems.
It hangs about as low as a stock swaybar.
Fine on the street.

Do you leave the heim joints attached while on the street?? Wouldn't that give a rather harsh ride??

Also I have weight jacker lowers......because I run 26" street tires and 28" slicks. With an ARB I won't be able to use the weight jackers right?? I figured once the ARB is setup, changing the ride height will screw it up.....or am I all wrong.

Thanks.

--Joe

[BurnTire]

The ride is not bad at all on the street with the bar hooked up. I have weight jackers also. You would have to reset the anti roll preload if you adjusted the ride height, but it is a very simple process.