Taking the fuel delivery market by storm with the dual pump fuel manifold Fore Precision Works, Lethal Performance and Zone 5 Performance are here to set yet another standard for fuel system upgrades. Introducing the Fore Precision Works S197 Triple Pump fuel Hat!!
http://www.lethalperformance.com/pag...-fuel-hat.html



Yet another work of art! This all new billet top hat made by Fore Precision Works is the cutting edge of fuel system upgrades for the S197 Mustangs. CNC machined from top notch billet aluminum.

Shipping the week of 5/14/08 ONLY at Lethal Performance!!
$420.00 + $69 for the Triple Pump Upgrade Kit (Upgrade Includes: 3 into 1 Billet and all the necessary fittings to run the 3rd pump) Y-Block fittings are separate.

Optional Hat to Stock Fuel Line Kit soon to be released
http://www.lethalperformance.com/pag...-fuel-hat.html

The Fore Precision Triple Pump Hat, Zone 5 Performance MDM, GT Pumps, -8an line and the stock rails showed us an amazing peak 72.5% duty cycle. That's 20% less duty cycle than what we saw with the stock fuel system at the same power level.


Triple Pump Hat Features:

-(3) -6an Outlets for Maximum Flow -Accommodates Dual or Triple Ford GT fuel pumps as well as wiring for Single, Dual and Triple input from the Zone 5 Performance MDM Module.
-Direct replacement and bolts right in using an OEM gasket for a perfect seal as well as using the OEM fuel sending unit in the same stock location.
-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.
-Three pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the Zone 5 Performance MDM . This allows your Ford GT pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.
-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.
-All assemblies are pressure tested prior to shipping.

The top hat includes:

# CNC Machined out of High Quality Billet Aluminum
# All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump
# Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump
# All XRP an Fittings
# New Bolts for mounting the assembly to the fuel tank


Note: The Top hat assembly when purchased alone does not include: Fuel Pumps, OEM Fuel Level Sender or OEM Gasket. These are items which can be reused from your stock hat assembly or purchased seperately.

In order to run the Triple Pump setup the triple pump option must be purchased. The triple pump upgrade option includes CNC machined 3-1 y-block, third pump retaining o-rings, in tank fuel line, hose clamps, third AN-6 fitting, and third fuel pump prefilter.

The Fore Precision Works top hat can be purchased by itself or as a fully assembled fuel system along with pumps, lines, rails, and the Zone 5 Performance MDM Module.


We'll be putting together our complete Triple Pump Fuel Systems shortly. Once we have pricing finished we'll post details.

If you'd like to Pre-Order a Triple Pump Hat or Zone 5 Performance MDM please give us a call and we'll be more than happy to reserve your spot in line. You will not get charged until the item(s) are ready to ship.

Thanks, Jared