Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: 315s on a stock rim

  1. #11
    Senior Member About2Bite's Avatar
    Join Date
    Feb 2008
    Location
    Chandler AZ
    Posts
    504
    Quote Originally Posted by sinspawn7 View Post
    alright 315s it is, thanks fellas
    So you're going with the Nittos?
    Black 04 Cobra

    KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
    SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
    2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17


    Quote Originally Posted by wickedcobra View Post
    I have it worked out with my wife too, I get car parts, she gets brooms, vacuum, irons etc....LOL

  2. #12
    Member
    Join Date
    Sep 2007
    Location
    Gilbert, AZ
    Posts
    60
    yeah i want the nittos they don't make a 315 only a 305

  3. #13
    Senior Member About2Bite's Avatar
    Join Date
    Feb 2008
    Location
    Chandler AZ
    Posts
    504
    Quote Originally Posted by dtsoxs View Post
    yeah i want the nittos they don't make a 315 only a 305
    I think they make a 335, that should work for you, the Nittos run small.
    Black 04 Cobra

    KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
    SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
    2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17


    Quote Originally Posted by wickedcobra View Post
    I have it worked out with my wife too, I get car parts, she gets brooms, vacuum, irons etc....LOL

  4. #14
    Member
    Join Date
    Sep 2007
    Location
    Gilbert, AZ
    Posts
    60
    Quote Originally Posted by About2Bite View Post
    I think they make a 335, that should work for you, the Nittos run small.
    I don't know they may be a little big my back rim is 10in have you seen a 335 fit under a cobra? if so that would be nice and prob look good...

  5. #15
    Senior Member About2Bite's Avatar
    Join Date
    Feb 2008
    Location
    Chandler AZ
    Posts
    504
    Quote Originally Posted by dtsoxs View Post
    I don't know they may be a little big my back rim is 10in have you seen a 335 fit under a cobra? if so that would be nice and prob look good...
    I'm not sure how well they'd fit on a 10" rim. The tire will stick out past the wheel a bit. Nitto recomends at least an 11.5" wheel and their 335 runs like 13.2" where as the BFG 315 runs a bit over 12.5" if I remember correctly (I believe the BFG's are the widest 315?), so it is definitely a wider tire. I've heard of guys running the Nittos without a spacer but i'd have a 3/8" spacer on hand just to be safe.

    I'll see if I can find any pic of someone running a Nitto 335 on a 10" rim
    Last edited by About2Bite; 04-14-08 at 02:56 PM.
    Black 04 Cobra

    KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
    SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
    2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17


    Quote Originally Posted by wickedcobra View Post
    I have it worked out with my wife too, I get car parts, she gets brooms, vacuum, irons etc....LOL

  6. #16
    Senior Member El Jefe's Avatar
    Join Date
    Mar 2006
    Location
    Tucson
    Posts
    840
    Might need the shaved IRS bolts
    04 Screaming Yellow Cobra 463rwhp/456tq
    74 Bronco 302/C4


  7. #17
    Member
    Join Date
    Sep 2007
    Location
    Gilbert, AZ
    Posts
    60
    Thanks for the info i'm prob going with the 305 it should look good and be wide enough

    Quote Originally Posted by About2Bite View Post
    I'm not sure how well they'd fit on a 10" rim. The tire will stick out past the wheel a bit. Nitto recomends at least an 11.5" wheel and their 335 runs like 13.2" where as the BFG 315 runs a bit over 12.5" if I remember correctly (I believe the BFG's are the widest 315?), so it is definitely a wider tire. I've heard of guys running the Nittos without a spacer but i'd have a 3/8" spacer on hand just to be safe.

    I'll see if I can find any pic of someone running a Nitto 335 on a 10" rim

  8. #18
    Member
    Join Date
    Sep 2007
    Location
    Gilbert, AZ
    Posts
    60
    Did you get your tires yet? I found the 305 for 240$ a tire...


    Quote Originally Posted by sinspawn7 View Post
    well its either 315s or 275s for the 17inch rim. i rather do the 315 but im worried about the fit. what do you guys think?

    thanks

  9. #19
    Senior Member
    Join Date
    Jan 2009
    Location
    Phoenix
    Posts
    948
    Quote Originally Posted by dtsoxs View Post
    See I told you they would work ha ha i wish they made a 315 for the 18in rim...

    i hyave a new set of 315x30x18 MT DR sitting here new

  10. #20
    Senior Member sinspawn7's Avatar
    Join Date
    Oct 2007
    Location
    Tempe arizona
    Posts
    275
    Quote Originally Posted by dtsoxs View Post
    Did you get your tires yet? I found the 305 for 240$ a tire...
    nope not yet

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •