Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: T56 Swap

  1. #1
    Junior Member 03whitecobra's Avatar
    Join Date
    Apr 2008
    Location
    currently in Germany
    Posts
    29

    T56 Swap

    A friend of mine wants to do a T56 swap in his 04 Mach1. He also want the aluminum drive shaft. We know about the 31 spline output shaft and brace but is there anything else we need? Heard something about the reverse lock out.

  2. #2
    Junior Member Mr03Cobra's Avatar
    Join Date
    Mar 2008
    Location
    Seminole, FL
    Posts
    18
    Using Diablosport tune, you can adjust for the change.
    Best ET: 10.21 @ 131mph
    On Nitto Drag Radials

  3. #3
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    31 spline output is not a standard cobra T-56.

    What is the tranny coming from?
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Location
    Phoenix
    Posts
    948
    been there and done that already

  5. #5
    Junior Member 03whitecobra's Avatar
    Join Date
    Apr 2008
    Location
    currently in Germany
    Posts
    29
    My friend is looking at the FRPP T56 and aluminum drive shaft. Steve @ Tousley said we will need the 31 spline yoke if it's for the tranny or diff. That's why I started this thread so we can get answers. We are here in Germany so there is no NAPA or Autozone and we are trin to order all the (correct) parts once. So any advice and pointers will be appreciated.

  6. #6
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by 03whitecobra View Post
    My friend is looking at the FRPP T56 and aluminum drive shaft. Steve @ Tousley said we will need the 31 spline yoke if it's for the tranny or diff. That's why I started this thread so we can get answers. We are here in Germany so there is no NAPA or Autozone and we are trin to order all the (correct) parts once. So any advice and pointers will be appreciated.
    I am not sure about this one, but I never heard of a 31 spline output shaft on a Ford T-56.

    I have a Viper Spec and it is a 30 spline.
    I know some corvettes have 31 splines.

    03/04 cobra has a 27 spine output shaft.

    You may want to get in touch with these guys as they are T-56 experts.
    http://www.ddperformance.com/
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  7. #7
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by Dan View Post
    been there and done that already
    Wow that answers his questions
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  8. #8
    Junior Member 03whitecobra's Avatar
    Join Date
    Apr 2008
    Location
    currently in Germany
    Posts
    29
    Quote Originally Posted by BurnTire View Post
    I am not sure about this one, but I never heard of a 31 spline output shaft on a Ford T-56.

    I have a Viper Spec and it is a 30 spline.
    I know some corvettes have 31 splines.

    03/04 cobra has a 27 spine output shaft.

    You may want to get in touch with these guys as they are T-56 experts.
    http://www.ddperformance.com/
    And maybe the Ford Racing T56 is even different from the others.

    Thanks

  9. #9
    Senior Member
    Join Date
    Jan 2009
    Location
    Phoenix
    Posts
    948
    Quote Originally Posted by BurnTire View Post
    Wow that answers his questions
    I said that that way he could send me a pm and ill go in to detail. but no big deal

  10. #10
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by Dan View Post
    I said that that way he could send me a pm and ill go in to detail. but no big deal
    LOL you know I'm just messing with ya Dan
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •