Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Pegged MAF?

Hybrid View

  1. #1
    Junior Member Blacksnake's Avatar
    Join Date
    Mar 2008
    Location
    South Carolina
    Posts
    22

    Pegged MAF?

    I have an '03 Cobra that I Dyno'd the other day and I'm not sure if the car is running rich or lean. My air/fuel ratio went from 14.7 to 18+ around 4500 rpm. The only mods the car has is off road x-pipe and Bassani catback. I purchased an SCT XCal2 tuner. but haven't used it yet. Any advice on whats causing this and is it safe?
    Step into the dark to see the light.

  2. #2
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    WAY BAD.... It should be below 12 for safety. Get a tune on that thing pretty quick.
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  3. #3
    Junior Member Blacksnake's Avatar
    Join Date
    Mar 2008
    Location
    South Carolina
    Posts
    22
    Thanks. But would that be rich or lean?
    Step into the dark to see the light.

  4. #4
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    You are lean. Lean is bad. Rich is much better
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  5. #5
    Senior Member ITLRUN's Avatar
    Join Date
    Jan 2008
    Location
    Fall River,Ma.02721
    Posts
    134

    Member

    Definetly not safe!!! Take your XCal-2 and Data-log the car. Enter in, coolant temp, intake air temp, MAF AD counts, RPM, spark, and load. Find yourself a good place to do a good 2nd. gear pull to around 5800 RPM, then shut it down. Don't forget to cancel your data-log, when you shut it down. Play back your data-log on live link, to see where everything is at. Another thing, you could dyno the car again on another dyno to see what you come out with there. It might be just a bad wide-band O2 sensor, at 4500 RPM your pulling pretty good on a dyno, your not at cruise speed to get a reading like 14.7, on your AFR. But to spike it like that, there's something definetly wrong with something. Data-log it first, to see what you come up with before you do anything drastic. After you data-log the car, post it, then we can all get a good look to give you a better idea, on what your next step should be. At 4500 RPM on a dyno pull, your AFR should be around 11.2 or somewhere in that neighborhood, Mike D. ( ITLRUN ) If you've never used an XCal-2 before, your going to have to get the vehicles strategy code. You can get that by plugging the XCal-2, into the ALDL port under the dash then scroll down til you see get vehicle strategy. It will be 7 digit, a combo of numbers and letters, just use the first 5 to configure your data-log. Let us know what you come up with, Mike.

  6. #6
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    It is lean. Get a custom tune. My A/F is 11.8 across the WOT range.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  7. #7
    Junior Member Blacksnake's Avatar
    Join Date
    Mar 2008
    Location
    South Carolina
    Posts
    22
    Thanks for the advice. This is the best site I've ever joined. Everyone helps out.
    I'll get it tuned at Amazon Racing this weekend. Hope they can squeeze me in.
    Step into the dark to see the light.

  8. #8
    Senior Member maddme's Avatar
    Join Date
    Oct 2007
    Location
    Phoenix
    Posts
    427
    Gold Award 
    If they can not fit you in. Try Performance Solutions or AZ Dyno.
    2007 Mustang GT/CS - 20 inch Custom Boyd Coddingtons, BFG KDW, Ford Racing air intake, x-pipe, pro cal tune, JBA axel backs.

  9. #9
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by maddme View Post
    If they can not fit you in. Try Performance Solutions or AZ Dyno.
    He is in South Carolina not AZ.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  10. #10
    Senior Member maddme's Avatar
    Join Date
    Oct 2007
    Location
    Phoenix
    Posts
    427
    Gold Award 
    Good point: That may be a drive for him (My bad) Still it would be worth it.
    2007 Mustang GT/CS - 20 inch Custom Boyd Coddingtons, BFG KDW, Ford Racing air intake, x-pipe, pro cal tune, JBA axel backs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •