Page 1 of 2 12 LastLast
Results 1 to 10 of 21

Thread: Great Night at the Races for All!!!

Hybrid View

  1. #1
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 

    Great Night at the Races for All!!!

    Well Shane, Andy, Bill, and I headed out to the track tonight and met up with Ken.

    We all posted a new best, I'll keep you in suspense and let them break the good numbers to ya!

    As for me I ran an 11.15 @ 119 mph with a 1.450 60'. Huge thanks to Bill and Shane for helping me get the suspension dialed in, I couldn't have done it without them. I ran three passes, and 2 of the 3 I cut a 1.45 and a 1.46 60'. The other I got out of the groove and cut a 1.51 60'.

    Yet again huge thanks to both Bill and Shane for all their help!!!!
    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  2. #2
    Senior Member IMSHAKN's Avatar
    Join Date
    Nov 2007
    Location
    Gilbert
    Posts
    726
    Silver Award 
    Please tell me you got some video? Would have loved to have seen it. Can you smell those 10s on a 100 shot?
    ~Andrew

  3. #3
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 
    My girlfried got a video of it on her digital camera, not sure how it's gonna come out. If it comes out decent I will post it up along with my time slip tomorrow. I believe there was also a video taken of my first shakedown pass. I ran an 11.8 @ 90 mph
    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  4. #4
    Senior Member IMSHAKN's Avatar
    Join Date
    Nov 2007
    Location
    Gilbert
    Posts
    726
    Silver Award 
    Yes...with you on the brakes by the 1000?
    ~Andrew

  5. #5
    Senior Member TorchedMach1's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix
    Posts
    422
    Gold Award 
    Quote Originally Posted by IMSHAKN View Post
    Yes...with you on the brakes by the 1000?
    Ya I had 2 runs like that. The second run a beat a Camaro by 3 tenths and he got me by about 30 mph.

    Nice Run

    Did you get daboot or do you have dacage?
    I got Das Boot and they weren't very happy with me!
    Arizona's Fastest Mach 1
    11.14 @ 120 w/ 1.48 60'

    GO-FAST MODS
    Magnaflow O/R X-Pipe
    Magnaflow Catback
    Steeda CAI
    Torch Red JLt Intake Tube
    Steeda Tri-Ax
    Spec Stage 3 Clutch
    Built 31 Spline Rear w/ 4.10's
    Rear Upper and Lower Control Arms
    NX Wet Kit (100 Shot)
    SCT Chip
    Custom Tune by PSR

  6. #6
    Senior Member IMSHAKN's Avatar
    Join Date
    Nov 2007
    Location
    Gilbert
    Posts
    726
    Silver Award 
    Quote Originally Posted by TorchedMach1 View Post
    I got Das Boot and they weren't very happy with me!
    I can't imagine why. I'm sure they loved your fancy foot braking as well. How long do you think they'll let you get away with things before they won't let you run without a cage?
    ~Andrew

  7. #7
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by TorchedMach1 View Post

    As for me I ran an 11.15 @ 119 mph with a 1.450 60'.
    Nice Run

    Did you get daboot or do you have dacage?
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  8. #8
    fourvalvegt
    Guest
    ok i made two passes with the new setup and learned that i definitely need to go to a different gear with the hp level that i am at
    my second pass was a 12.58 at 105 letting off just before the 1000 ft because 4.30s arent worth it anymore and i may be going down to a 3.90 pretty soon. and a big thanks to jay for letting me borrow the et streets they really helped the car hook

  9. #9
    Senior Member Indy's Avatar
    Join Date
    Jun 2006
    Location
    PHX AZ
    Posts
    701
    CONGRATS on the new best Jay, your diving the H E L L outta that Mach!!!!! I'm happy to help in anyway I can.

    The tower wasn't complaining about him braking this time out. They were actually having a little fun with it. I remember hearing them say " Watch this mustang it leaves the line real hard, BUT gets out of it around the 1/8 LOL."

    Glad to see ya finally back at the track last night Andy. Now get those gears changed so we can see what your stang can do.

    And CONGRATS to Ken also!!!!

  10. #10
    Senior Member WildBill's Avatar
    Join Date
    Mar 2009
    Location
    Phoenix, DFW or a trailer at the track
    Posts
    944
    I was happy to do my part Jay!
    Between me up close to the line and Shane taking in the big picture, we had ya covered pretty well!

    It's great to work with someone that follows directions with exacting precision, Jay!

    It was a REAL pleasure to work with someone such as Shane!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •