ok, so yesterday at the track i put a bag of ice wraped in a towel ontop of my blower to cool it down between runs. well, never have had this problem before, but at the end of the day i noitced that it looks like the towel "etched" the polished surface on the case of my blower. i have tried cleaning it with detial spray and what not, and its not coming off that way. any suggestions about getting these horrible looking marks out?
Results 1 to 6 of 6
Thread: polishing question...
-
02-10-08, 05:53 PM #1Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
polishing question...
-
02-10-08, 07:37 PM #2Super Moderator
- Join Date
- Jul 2006
- Location
- Mesa, Az
- Posts
- 4,443
Tone your gonna have too polish it out with a small amount of cream, like never dull. By hand at first and then use a small wheel, soft wheel could use a dremel depending on how big the marks are..
"The choices we make, dictates the lives we lead"
-
02-10-08, 08:00 PM #3Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
ahh. yeah, i just found some old metal polish in the garage and started to work on it, its coming off, but man is it takin some elbow grease. i need to get me a wheel. considering the small area of the blower itself, i am thinking i could use my dremel though.
Last edited by Jacostang; 02-10-08 at 09:35 PM.
-
02-10-08, 09:22 PM #4Senior Member
- Join Date
- Aug 2007
- Location
- Prescott, AZ
- Posts
- 176
Haha yeah, he was still workin on it when I left a couple hours ago... how's that workin out for ya Big T?
"Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you."
-
02-10-08, 09:36 PM #5Super Moderator
- Join Date
- Jul 2006
- Location
- Mesa, Az
- Posts
- 4,443
Get yourself a dremel tool for those touch up situations!!!
"The choices we make, dictates the lives we lead"
-
02-10-08, 10:12 PM #6Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
i have a dremel...just not the right bit! need to get on that..
Reply With Quote