Ok now keep in mind I am just messing around . I have been porting for years and this is not something I like to do however I wanted to see it these intakes will make power. So I bought on and cut it up to see what makes them tick and I found a bunch of crap in side. There was a lot of casting flash that we removed . I have not gone threw and painted this or any thing this is a raw picture. And detailed pictures of the inside of your intake. Take a look. We normally port heads not intakes, But as you can see it does not take a rocket scientist to get the job done. We have enlarged quite a few areas that we feel would improve air flow.
Ok guys here are some shots on my little port work
First this is stock
Now this is what it looks like now
Here is the one port that is almost closed off I have opened it up so it too can now add air to the motor. This was the only restricted port I seen
This is what it looks like now
Here are some more of the runners
And some of the top side
Results 1 to 10 of 11
-
12-20-07, 10:42 PM #1Senior Member
- Join Date
- Jan 2009
- Location
- Phoenix
- Posts
- 948
ported intake any one Done by PSR
-
12-20-07, 10:47 PM #2Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
intresting, looks like there was definetly some improvement done. what kind of whp do you think could be gained?
-
12-21-07, 10:00 AM #3Senior Member
- Join Date
- Jan 2009
- Location
- Phoenix
- Posts
- 948
no idea we shall see on indys car
-
12-21-07, 05:47 PM #4Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
very cool! can't wait to see that one!
-
12-23-07, 11:12 PM #5Member
- Join Date
- Nov 2007
- Location
- Leesburg,VA
- Posts
- 64
was this on the registry? i would love to do this to mine. ill have to save a little and see what i can do
2003 Azure Blue Mach 1:
performance:
SLP loudmouth 1 catback, Bassani catted X, JLT true ram air intake, Hurst short throw
Cosmetic:
taillight tint
Coming soon:
FRPP 4.10 gears, Black 18" FR500
-
12-23-07, 11:28 PM #6Senior Member
- Join Date
- Jun 2006
- Location
- PHX AZ
- Posts
- 701
Yes, its posted on M1R too.
Originally Posted by bleedingfordblu
-
12-24-07, 01:08 AM #7Senior Member
- Join Date
- Sep 2006
- Location
- Phoenix
- Posts
- 1,024
hope it works better than Nazman's Intake work lol
-
12-24-07, 01:22 AM #8Senior Member
- Join Date
- Nov 2007
- Location
- Gilbert
- Posts
- 726
Not a chance in hell. Dan's intake will come complete with a high quality metallic dust that is has been dyno proven to boost performance. Originally Posted by ahawkins
In all seriousness, I would be curious to see how one of Dan's or Roy's intakes do on Indy's car with the spray. I'm looking to be hooked up on the giggle gas by this summer so squeezing out some more power would be nice.
-
12-24-07, 06:48 PM #9Senior Member
- Join Date
- Jan 2009
- Location
- Phoenix
- Posts
- 948
No dynos dont mean sheit you should always use the A$$-O-Meter
famous words from Nazman
-
12-24-07, 07:32 PM #10Senior Member
- Join Date
- Nov 2007
- Location
- Gilbert
- Posts
- 726
Dan, you don't need a dyno. Just addssome more fuel to compensate for the higher air flow and then do few 0-120mph pulls on public streets to feel how much power was gained. If it feels faster, then you must have gained at least 20hp. That's all that is important. Dyno's just give numbers
Reply With Quote
