Results 1 to 8 of 8

Thread: 1988 Gt...no high beams

  1. #1
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150

    1988 Gt...no high beams

    Maybe someone out there can shed a little on this problem. I have low beams and the pass to flash will bring the high beams on...but when switched to high beam they dont come on. I figured it was the switch so I ordered a new one...same problem. Has anyone run into this before? I would appreciate any help. Thanks guys.

  2. #2
    Super Moderator Jacostang's Avatar
    Join Date
    Jul 2006
    Location
    Mesa, Az
    Posts
    4,443
    Platinum Award 
    The relay switch that turns off the driving lights when you put your hi beams on... it overloads when you have both driving and headlights on for any peroid of time ( There is a retro fit that lets you run you hi beams and driving lights)... probably went bad..
    "The choices we make, dictates the lives we lead"


  3. #3
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    The thing with this problem is that I have no fog lights on the car (thats the way I bought it). I replaced the headlight/fog light switch and the multi function switch. The real weird thing about this is I get the same problem with both switches. When ohming the switch, I get no reading from what is the high beam terminal and the power terminal. Now when you pull the switch back for the pass to flash...the high beams work. Doesn't make a bit of sense but I can't believe that a new and an old switch would have the same identical problem. Any ideas now?...i'm stumped..lol

  4. #4
    Senior Member SONIC03SNAKE's Avatar
    Join Date
    Jun 2006
    Location
    Mt. Pleasant, PA
    Posts
    101
    Platinum Award 
    Quote Originally Posted by DarkStang View Post
    The thing with this problem is that I have no fog lights on the car (thats the way I bought it). I replaced the headlight/fog light switch and the multi function switch. The real weird thing about this is I get the same problem with both switches. When ohming the switch, I get no reading from what is the high beam terminal and the power terminal. Now when you pull the switch back for the pass to flash...the high beams work. Doesn't make a bit of sense but I can't believe that a new and an old switch would have the same identical problem. Any ideas now?...i'm stumped..lol
    Pull the switch out and check all the wiring that plugs into it, fox cars are notorious for melting the harness going into the switch.
    NMRA #MM7521
    2005 WFC Modular Street Winner

    Quickest and fastest stock pullied, non ported eaton 03 in the country.
    11.160 @ 125.08 Record retired

    New combo, new #'s soon.
    508 Hp 548 TQ SAE
    10.55 @ 130 MPH

    594 HP 756 TQ on the sauce

    Real Name = Lou.

  5. #5
    Senior Member Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Monessen, PA
    Posts
    392
    A bad turn signal switch will cause the hibeams to quit working. Be sure to check the connector on that switch.

  6. #6
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    Damn Viper...I almost didn't read your message...got distracted...damn nice avatar....anyways, with the help of Gary who goes by Fastback Fox we got the problem figured out. The connector was melted but the real problem was some idiot who thought he was a mechanic had 2 wires switched around. After figuring this out...I have high beams. So thanks again to Gary and to all the suggestions on this problem. Merry Christmas and Happy New Year to everyone.

  7. #7
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    By the way...how do I change my avatar???

  8. #8
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by DarkStang View Post
    By the way...how do I change my avatar???
    http://www.highperformancestangs.com...?do=editavatar
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •