60 foot time

[BurnTire]

Do you suggest that I run adjustable upper control arms or upper and lower both? Also are your Tokico shocks adjustable? Do you have any suggestions for what brand antiroll bar to buy? I am curious does your Cobra have a straight rear end in stead of the IRS? Also how much HP is your car making. Ron

The Tokicos are adjustable.

I have a new solid axle in my car that is still work in progress. Car is probably 630+ on the race tune.

I use steeda weigh jacker lowers with delrum bushings on the chassis side / spherical on the axle side.


Steeda also make a hardcore lower control arm if adjustable ride height is not something you want.


I use steeda double adjustable uppers with spherical bushings on both sides.

Housing Bushings.


Pinion angle is set at -2.

I am still waiting for my Miller Race Cars Anti Roll Bar which can be used with tail pipes.
http://www.millerracecars.net/antiroll.html

Do you run tail pipes or dumps on the car? Steeda has a new anti-roll bar that works with tail pipes also.

If you need anything check with our sponsors they can take care of your parts needs.

[BurnTire]

Good reading on the physics of launching.

http://www.baselinesuspensions.com/i...A_Drag_Car.htm

[4Jenna]

Street Car?
What Power Adder?
Leaving on the Brake?
Vehicle Weight?

[THREEBLOWNGTS]

The car weighs 3440 with me in it , yes it is a street car with a 6 point cage and full interior and sound deadner. The motor is a stock block 347 with Ebelbrock Performer heads, not ported,Edelbrock intake and a S-trim Vortech. The car has full length 13/4 headers and full exhaust. Yes I leave on the brake, I have no trans brake.

[THREEBLOWNGTS]

I appreciate what BURNTIRE has told me about, very helpful. Also I forgot to mention I am running 14 pounds of boost.

[BurnTire]

I appreciate what BURNTIRE has told me about, very helpful. Also I forgot to mention I am running 14 pounds of boost.

There are many options out there that will work. Steeda is my choice of parts. I know some people also have good success with the HPM Mega Bite JR lower control arms. Dust off that credit card.

[4Jenna]

Get a transbrake, and 2 step....build a lil boost on the line put a load on her, otherwise I dont see you going low 1.5s to 1.4s.