10 sec terminators

[LSlayer]

How much have you invested in your car to get to where your at. If I were to trade in for and build up a Cobra I'd lookin to get down into the mid to high 10s. The key thing is I wanna keep her streetable, meaning minimal race fuel, can be setup to pass emmisions with ease, and no overheating(ha ha in AZ). The turbo setups to make tremendous power but most seem to require a new K-member. Is this just a fact of life or do some kits get away with using the stock K-member.

[AZSonicSnake]

any turbo kit will require an aftermarket k member on a terminator. i am not a 10 second car yet, but i can tell you it does depend on how you wanna get there. honestly the previous owner of my car used a solid rear axle and a large shot of nitrous and a good clutch and he ran tens. thats about 5-7k to go about it that way. it all depends on how you wanna do it, since you can use either nitrous, aftermarket blower, ported blower, turbo, or a combo of nitrous and any of the above.

personally for me, i know my plans intail a ported blower that i currently have on the car, and a small shot of nitrous to hit tens. i have no current plans of going kenne bell, whipple or turbo.

[BurnTire]

My car passes emissions and was very streetable with the IRS when I went 10's.
I had a whipple and all the required supporting mods and safety equipment. At that point I had 17K in mods on the car.

[LSlayer]

17K, man thats gonna take a while. What were all the supporting mods?

[BurnTire]

17K, man thats gonna take a while. What were all the supporting mods?

Whipple Supercharger 19 PSI
JLT CAI
60 lb Injectors
Accufab TB
SCT BA 2400 MAF
Billet Flow Idlers
LFP HE and Reservoir
NGK-BR7EF Plugs
Hurst Line Lock
Mac Pro Chamber
Magnaflow Cat Back
Kenne Bell BAP / Wiring Upgrade
Kenny Brown Sub Frame Connectors
Billet Flow IRS Brace
McLeod Bell Housing
McLeod TB Sleeve
26 Spline Input Shaft
Ram Power Grip HD Clutch
Ram Billet Steel Flywheel
Fiore Firewall Adjuster
Steeda QR Quadrant
MGW Shifter
Raptor Shift Light
PLX Wide Band
Autometer Lunar Boost & Fuel
Speed Of Sound Pod/Pillar
LMM Drive Shaft Loop
MM 6 Point Roll Bar
GForce 5 Point Harness
SCT Pro Racers Package

And some more I missed for sure. LOL

[Gene]

you can get everything you need from our reputable vendors in the vendor section for around 6K and go 10's all day long. Call them, and tell them what you want to do.

[LSlayer]

Thats quite a sig there buddy.