Results 1 to 10 of 10

Thread: Lot of valve noise

  1. #1
    Junior Member
    Join Date
    Oct 2007
    Location
    League City, TX
    Posts
    9

    Lot of valve noise

    i have an 01 gt and it has been makin alot of valve tick wonderin if the valve train is adjustable at all bein that its ohc or if this is normal for the 4.6 any info would be great thanks

    matt
    Last edited by blk01gt; 10-21-07 at 09:23 PM.

  2. #2
    Senior Member AZSonicSnake's Avatar
    Join Date
    Apr 2006
    Location
    North Phoenix
    Posts
    4,184
    Gold Award 
    its not adlustable that i know of. sounds like you could be low on oil or have low oil pressure. that would cause some top end noise.

    Tuned By PSR TUNING
    11.07 @ 127.93
    My Autolog Profile

  3. #3
    Junior Member
    Join Date
    Sep 2007
    Location
    Collinsville, IL
    Posts
    8
    Do you have aftermaket cams?

  4. #4
    Junior Member
    Join Date
    Oct 2007
    Location
    League City, TX
    Posts
    9
    stock cams and oil pressure is great plus plenty of oil

  5. #5
    Member 6Jeff6's Avatar
    Join Date
    Sep 2007
    Location
    goodyear
    Posts
    93
    When does it make noise??
    If it's just a start up then it's the chain tensioners making the noise..



    Jeff
    00 gt 2.2kb auto
    98 gt stock

  6. #6
    Junior Member
    Join Date
    Oct 2007
    Location
    League City, TX
    Posts
    9
    nah it makes the noise idleing but its not coming from the front where the timing setup is its comin from under the valve covers who knows its prolly just the nature of this particular engine

  7. #7
    Member 6Jeff6's Avatar
    Join Date
    Sep 2007
    Location
    goodyear
    Posts
    93
    I know injectors can tick or click also when they're bad. I've never heard it myself but I know a few people that have replaced them and it was gone.

    You can just unplug one at a time to test. Just don't rev or run it for long just pull and if noise is gone you got it.

    Hope this helps

    Jeff
    00 gt 2.2kb auto
    98 gt stock

  8. #8
    Senior Member
    Join Date
    Jan 2009
    Location
    Phoenix
    Posts
    948
    that shound like piston slap my friend

    I see a short block inyour future

  9. #9
    Junior Member
    Join Date
    Jun 2006
    Location
    Peoria
    Posts
    20
    is it the original valve springs? That would explain why they just cant close the valves fast enough to keep the rocker arm against the cam all the time.

  10. #10
    Junior Member
    Join Date
    Dec 2007
    Location
    south jersey
    Posts
    5
    i have something of the same noise in my engine(99 gt). its real bad when the engine is cold and after it warms up the noise calms down a little. if its piston slap would i be able to just take off the heads and have them worked or am i going to have to tare into the bottom end?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •