Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Post Kenne Bell install problems...

  1. #1
    Junior Member
    Join Date
    Oct 2007
    Location
    Norwich, CT
    Posts
    7

    Post Kenne Bell install problems...

    Possibly fuel related...well it's def. fuel related somehow. I got my Kenne Bell installed perfect a couple weeks ago. 10psi @432rwhp...not bad really.
    Anyway, I'm having some sort of fuel starvation issue. I'm now running at a constant 9psi...which is really ODD! And my A/F went from 11.2 to 12.2 and the numbers are constant on the Dyno. Not sure if my Kenne Bell Boost-A-Pump is acting up or something screwed up in my fuel map. But its causing me great annoyance and pain that NO ONE can seem to figure this out.

    Any help here would be great!
    07 Vista Blue GT M/T
    KenneBell 2.6L Blown
    432RWHP 407RWTQ
    Steeda Suspension/Chassis
    Bassani cat-back X-pipes

  2. #2
    Super Moderator 4Jenna's Avatar
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    1,939
    Platinum Award 
    Have you talked with your tuner and/or installer?

    Or did you do all the work yourself?
    JENNABEARS Foundation
    www.jennabearsfoundation.org

  3. #3
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Fuel is off in the tune. Not sure how the 07 curve works. Fuel pumps are maxed out. Fuel filter could be getting clogged.

    What setting is your BAP set at?
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  4. #4
    Junior Member
    Join Date
    Oct 2007
    Location
    Norwich, CT
    Posts
    7
    Quote Originally Posted by 4Jenna View Post
    Have you talked with your tuner and/or installer?

    Or did you do all the work yourself?
    I started it myself and got to a point where if I didn't have a lift it was just going to be a pain so I had it professionally installed. Not my first choice but i didn't want it screwed up....heh
    I talked with them and they couldn't figure it out...
    It seemed to me after taking the suggestion from KB to flash back to factory settings then the KB tune again. They kind of threw their hands up, like that voided their work.
    07 Vista Blue GT M/T
    KenneBell 2.6L Blown
    432RWHP 407RWTQ
    Steeda Suspension/Chassis
    Bassani cat-back X-pipes

  5. #5
    Member 6Jeff6's Avatar
    Join Date
    Sep 2007
    Location
    goodyear
    Posts
    93
    Quote Originally Posted by SCdStangGT View Post
    I started it myself and got to a point where if I didn't have a lift it was just going to be a pain so I had it professionally installed. Not my first choice but i didn't want it screwed up....heh
    I talked with them and they couldn't figure it out...
    It seemed to me after taking the suggestion from KB to flash back to factory settings then the KB tune again. They kind of threw their hands up, like that voided their work.

    Could be a bad tank of fuel??
    I'd get a custom tune from a local tuner. You might gain some hp but usually you get better driveability.

    Jeff
    00 gt 2.2kb auto
    98 gt stock

  6. #6
    Junior Member Nory@DRI's Avatar
    Join Date
    Sep 2007
    Location
    Miami
    Posts
    16
    Quote Originally Posted by SCdStangGT View Post
    Possibly fuel related...well it's def. fuel related somehow. I got my Kenne Bell installed perfect a couple weeks ago. 10psi @432rwhp...not bad really.
    Anyway, I'm having some sort of fuel starvation issue. I'm now running at a constant 9psi...which is really ODD! And my A/F went from 11.2 to 12.2 and the numbers are constant on the Dyno. Not sure if my Kenne Bell Boost-A-Pump is acting up or something screwed up in my fuel map. But its causing me great annoyance and pain that NO ONE can seem to figure this out.

    Any help here would be great!
    There is a TSB out for problems with fuel pumps on the S197s.

    And with that much boost, I highly recommend the GT500 Fuel pump kit. You are more than likely runnning out of fuel pump.

  7. #7
    Senior Member
    Join Date
    Jan 2009
    Location
    Phoenix
    Posts
    948

  8. #8
    Junior Member
    Join Date
    Oct 2007
    Location
    Norwich, CT
    Posts
    7
    Quote Originally Posted by Nory@DRI View Post
    There is a TSB out for problems with fuel pumps on the S197s.

    And with that much boost, I highly recommend the GT500 Fuel pump kit. You are more than likely runnning out of fuel pump.
    KB says their set up for the 07 is fine with just the BAP and stock GT pump. A few other mustang tuners say the same thing. I for one just don't buy it. EVERYOTHER twinscrew manufacturer says upgrade your pumps. I also don't like the price hack for the GT500 pump kit almost $800 from most places. A price tag I just can't afford right now...as for the tune, I trust KB's tune, the vacuum switch is fine, the boost lines are fine, the bypass/valet switch is fine, the BAP is fine (I think). Its pretty much a plug-n-play set up. No cockpit controller, just a preset resistor in there for "on/off".
    07 Vista Blue GT M/T
    KenneBell 2.6L Blown
    432RWHP 407RWTQ
    Steeda Suspension/Chassis
    Bassani cat-back X-pipes

  9. #9
    Junior Member
    Join Date
    Oct 2007
    Location
    Norwich, CT
    Posts
    7
    07 Vista Blue GT M/T
    KenneBell 2.6L Blown
    432RWHP 407RWTQ
    Steeda Suspension/Chassis
    Bassani cat-back X-pipes

  10. #10
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Wow that would be a long drive to Dan in Phoenix!
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •