Not done yet but I am starting to understand how to handle hitting the tires real hard with a stick launching at the limiter. I am running 11.0, 11.1 more consistently with my eaton in hot air. Most 60 fts are around 1.52 - 1.56 with one 1.51, but I have to keep 12+lbs in the tires so I am always on the ragged edge of smoke'm them. Any lower and the Stiff side M/T slicks collapse bad, but if I prevent that they are hooking hard enough to pull the wheels a inch or so most passes with only 500 hp and almost full weight (3610 w/me).
the first pics are if I cross the line of not enough air (11.5lbs) & too much rpm (6500) for my clutch, flywheel, 10x26" tire, air bags psi, combo.
the second one is a real good hit on the tires, my best 60ft 1.51.
now for my new recent pictures adjusting to track conditions and trying some other small tweaks. I have managed to keep from making them angry but if I miss the other way (too much air:spin or not enough rpm:bog ) I can end up with a 1.58-1.62 real easy, so by stiffening and focusing the 9" with the anti-roll, Mach1 springs and 5-to-20lbs in the air bags with a 5-7lb stagger I have a very small window of setup to get the most out of a tire that I can plant way too hard, way too easy!
oh well the mushy IRS used to be much more very forgiving.
nice to be back online, replacing the laptop that died during a pass 3 weeks ago (9/14) was a real PITA.
Trying to get older software to run on vista sucks on top of all the $$$$!
Results 1 to 8 of 8
Thread: tire hit launch pics
-
10-07-07, 11:13 PM #1Member
- Join Date
- Aug 2006
- Location
- Upstate NY
- Posts
- 88
tire hit launch pics
-
10-07-07, 11:27 PM #2Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
wow, those are some incredible pics! thanks for posting them up.
-
10-07-07, 11:37 PM #3Super Moderator
- Join Date
- Apr 2007
- Location
- AZ
- Posts
- 1,939
Awesome pics, the ARB has you leaving nice n striaght!
JENNABEARS Foundation
www.jennabearsfoundation.org
-
10-08-07, 12:55 AM #4Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Stu is that a MRC anti roll and 26" slicks?
What is your front end setup?Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
10-08-07, 04:26 PM #5Junior Member
- Join Date
- Oct 2007
- Location
- Dallas, Tx
- Posts
- 23
Nice pictures, bad ass ride too...
04 Laser Red 5-Speed GT Mods:
BBK Plenum * BBK 75mm T/B * BBK Cold Air Kit * H&R Drop Springs * Steeda Tri-ax Shifter * UPR C/C Plates * MAC O/R H * Flowmaster Mufflers * Diablosport Tuner * NGK TR-6 Plugs
-
10-08-07, 05:33 PM #6Senior Member
- Join Date
- Sep 2007
- Location
- Luke AFB
- Posts
- 903
awsome pics car is leaving nicely on that 9". I remembe watching the progress of this car when you started posting up on svtsnake back in the day. Cars progressing nicely exspecially upstate in those altitudes. (was fron eastern long island but got stationed out in az now)
Last edited by Ruckus46gt; 10-08-07 at 06:02 PM.
-
10-08-07, 10:03 PM #7Senior Member
- Join Date
- Mar 2007
- Location
- El Mirage, AZ
- Posts
- 249
Looks good!
'03 Cobra - Mildly modded. A work in progress.
12.566 @ 110.755, 1.89 60' on street tires
'93 Notch - Looks faster than it is.
'72 F100 4x4 - Dormant, for now.
Race '99 L - 12.40 @ 110
-
10-09-07, 09:45 AM #8Senior Member
- Join Date
- Nov 2006
- Location
- Scottsdale
- Posts
- 750
Nice! You guys must be enjoying the extended summer temps up there- more track time for sure!
2011 Shelby GT 500
Black/Black/Satin Black Stripes, Electronics Pkg, FRPP/BMR Suspension/Borla-Ford Racing Exhaust
488rwhp/463rwtq bone stock
Great Past Rides:
2003 Mustang Cobra SVT Convertible- 302 Stroker & more- PSR Tuned, 2003 Mustang GT- Silver Coupe w/boltons
1996 Mustang GT/SC- Paxton SC & Tons of Mods- SuperFord Mag Car, 1995 Mustang- Red w/boltons. 1968 Galaxie 500
Reply With Quote
