hey people! i'm new to the site and i just have a few questions regarding my new project car for this winter. i want to buy a 1999 to 2004 mustang, but around here there aren't many v8's. so i was wondering if it is possible to drop the entire cobra drivetrain into a v6 mustang including exhaust and everything. i know the body panels will line up but i wonder about the drivetrain and exhaust because its not a dual exhaust or a v8. any help would be appreciated. please email me or just post on this thread so i can get started. i have a cobra parts car that was hurt due to fire damage but the body panels are good and the trans and rearend so i just really want to know what a good idea is. thanks
Results 1 to 5 of 5
Thread: mustang project car
Hybrid View
-
10-07-07, 08:23 AM #1Junior Member
- Join Date
- Oct 2007
- Location
- London Ontario
- Posts
- 1
mustang project car
-
10-07-07, 10:29 AM #2Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
I believe you can. As far as the exhaust you just need the hangars for the dual exhaust. Sounds like a nice project.
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
10-15-07, 01:41 PM #3Member
- Join Date
- Oct 2007
- Location
- Phoenix
- Posts
- 66
Yeah man almost everything will fit right in. You will have to find hangers for the exhaust and other little stuff like a main wiring harness and computer but nothing too extreme.
-
10-15-07, 06:50 PM #4Member
- Join Date
- Oct 2007
- Location
- Orem, Utah
- Posts
- 55
You may want to also check the suspension. If I were you I'd make sure that you swapped over the axles/IRS, brakes and so on. As Graham said you will need the computer and wiring harness.
Just another stock Mach.
-
10-15-07, 08:26 PM #5Senior Member
- Join Date
- Sep 2006
- Location
- Phoenix
- Posts
- 1,024
Also take into consideration that the v6's have the 7.5" rear end and all the v8's have the 8.8"
Reply With Quote