CDC Light bar

[BLK03SVT]

So I finally got my CDC light bar installed on the cobra last night. Overall the install was pretty straightforward. I won't lie, there were a few curse words here and there, but nothing a cold heinekin couldn't handle. Overall it took about 4 hours. I now need to either replace the seat belt loops or do the mod as suggested in the kit, as they do interfere with the bar. I'm leaning towards ordering the smaller loops and replacing the stockers.

Only real issue I had (have) was the instructions call the rear brake light wire to be solid green, when in fact its more of a teal color (there are other solid green wires). The connectors supplied with the kit are cheap and I'm going to replace them with a higher quality connector.

Drilling holes in your factory interior panels isnt ideal, but if the templates are laid down right they line right up.

Here's a few pics. I haven't detailed the car yet so the finger prints are apleanty....

[OH3MGSVT]

looks great man, you should help me install mine when I order one

[AZSonicSnake]

looks sweet!!!

i know on my cobra i do not even use those seat belt loops. i took the belts out of the loops a long time ago.

[BurnTire]

Get those scratches fixed on the left door Mike?

[Blackcobraconv]

I took the loops off mine also when I installed the light bar. Try it, you can always add the smaller loops later if you don't like it without them.

[BLK03SVT]

Get those scratches fixed on the left door Mike?

I did get the lower scratch completely out, but the upper scratch where the canopy hit first is pretty deep. I think I need a pro to take a shot at it.