Results 1 to 6 of 6

Thread: Race tommorow

Hybrid View

  1. #1
    Member
    Join Date
    Apr 2007
    Location
    Flagstaff
    Posts
    91

    Race tommorow

    Hope you guys have a great day tommorow!! Unfortunately can't go. Car is still down. should be up in 2 wks with new front suspenstion and front brakes (I did decide to go with MM K-member and coil overs , thanks for your input). Drive hard, fast, and stay safe.
    mitch
    1996 Cobra Pearl White
    Balanced blueprinted forged internals
    Stage 1 heads, Vortec SQC2 12 lbs boost, MSD, Ford ceramic headers, Bassini X, FlowMaster StageII, T45, upgraded internals, MM Panhard, Torque, Tokiko, MM subs, Auto Cross 4 pnt, 5 pnt harness. 490rwhp

  2. #2
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    I just can't frickin win. I threw DTC codes PO171 and PO174 System to Lean Banks 1 & 2 tonight while I was just cruising around. So I am not going tomorrow because I have to check a bunch of things to see what caused the code. Here is my list. I am not getting this done tonight.

    Air Measurement System
    • MAF sensor (contaminated, damaged, malfunctioning, etc.)
    Fuel System
    • Fuel pressure regulator (leaking, malfunctioning, etc.).
    • Fuel filter plugged, dirty.
    • Fuel pump (weak, check valve leaking, etc.).
    • Leaking/contaminated fuel injectors.
    • Low fuel pressure or running out of fuel.
    • EVAP canister purge valve leaking (when canister is "clean").
    • Fuel supply line restricted.
    • Fuel rail pressure sensor (incorrect reading).
    Air Induction System
    • Air leaks after the MAF.
    • Vacuum Leaks.
    • PCV system (leak, valve stuck open, etc.)
    • Improperly seated engine oil dipstick.
    Exhaust System
    • Exhaust leaks before or near the HO2Ss (exhaust manifold gasket, mating gaskets, etc.)..
    EGR System
    • EGR valve tube/gasket leak
    • EVR solenoid vacuum leak
    Secondary Air Injection
    • Damaged/malfunctioning secondary air injection system (mechanically stuck valve).
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  3. #3
    Senior Member Indy's Avatar
    Join Date
    Jun 2006
    Location
    PHX AZ
    Posts
    701
    I just found out that my babysitter has to do something for work. He didn't find out about it till after work 2night.

  4. #4
    Senior Member TRUUBLE's Avatar
    Join Date
    Dec 2006
    Location
    Scottsdale
    Posts
    201
    Quote Originally Posted by BurnTire View Post
    I just can't frickin win. I threw DTC codes PO171 and PO174 System to Lean Banks 1 & 2 tonight while I was just cruising around. So I am not going tomorrow because I have to check a bunch of things to see what caused the code. Here is my list. I am not getting this done tonight.

    Air Measurement System
    • MAF sensor (contaminated, damaged, malfunctioning, etc.)
    Fuel System
    • Fuel pressure regulator (leaking, malfunctioning, etc.).
    • Fuel filter plugged, dirty.
    • Fuel pump (weak, check valve leaking, etc.).
    • Leaking/contaminated fuel injectors.
    • Low fuel pressure or running out of fuel.
    • EVAP canister purge valve leaking (when canister is "clean").
    • Fuel supply line restricted.
    • Fuel rail pressure sensor (incorrect reading).
    Air Induction System
    • Air leaks after the MAF.
    • Vacuum Leaks.
    • PCV system (leak, valve stuck open, etc.)
    • Improperly seated engine oil dipstick.
    Exhaust System
    • Exhaust leaks before or near the HO2Ss (exhaust manifold gasket, mating gaskets, etc.)..
    EGR System
    • EGR valve tube/gasket leak
    • EVR solenoid vacuum leak
    Secondary Air Injection
    • Damaged/malfunctioning secondary air injection system (mechanically stuck valve).
    I can fix it!!! It won't be street legal anymore . . but it will be faster and more fun!!!

    Sorry to hear that, Jeff. I'll make a good pass on your behalf. My business partenr is bringing out the professional video equipment, so we'll have lots of footage.
    Fastest N/A Mustang vert on the planet? (9.81@ 136.34 mph) If I had a TURBO I could go back in time


  5. #5
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    I just can't win. I did a datalog pull today at WOT and all looks fine on the fuel system, but I am very cautious with codes like this so I want to check everything out throughly. Looks like it going to be a good day for racing.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  6. #6
    Senior Member TRUUBLE's Avatar
    Join Date
    Dec 2006
    Location
    Scottsdale
    Posts
    201
    It's gonna be a little warm . . but maybe I can finally get my water temp over 150 . . lol.
    Fastest N/A Mustang vert on the planet? (9.81@ 136.34 mph) If I had a TURBO I could go back in time


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •