Mustang Cobra PPRV Removal Information

[BurnTire]

How to remove the PPRV (Hesitation Creator).

The PPRV is known to cause hesitation issue between shifts in high boost applications.

Remove the Tank.

Be sure to disconnect the float arm before pulling the assembly all the way out of the tank. If you don't you will break the arm and or the sending unit.

When you go to install the new assemble put the float arm in the tank first then drop the assemble in.
Then re attach the float arm. BE CAREFUL WITH THE FLOAT ARM!!!!! An extra set of hands always helps. Take your time.



Remove the PPRV and Stock Plastic Hose

Replace with:

Carquest stocks the hose part number 27097

Gates 3/8" x 1' submersible fuel line. $20 a foot.

or Napa
Gates SAE30R10 (Gates # 27097), Napa part # H213

You will need 2 feet of hose. (You will need to trim the hose)

Get 6 smooth hose clamps and have fun.

You can reuse the stock Y fitting or buy a new one.

[jophis37]

I'll be doing this mod in the near future, as well as upgrading the fuel line to the rails and the BAP wiring upgrade.

[50 BMG]

Yep. First 2 things I'll do when I drop the tank is PPRV removal and anti-siphon removal.

[MinGry03]

Great write-up. Mark, PJ-1 and myself will be doing that mod later this spring to my car.

[u1arunit]

Best mod to remove the hesitation!

PJ2 you better start buggin PJ1 to see when he is going to help! lol

[BurnTire]

Best mod to remove the hesitation!

PJ2 you better start buggin PJ1 to see when he is going to help! lol

Doesn't matter Mark does all the work.