Clutch and Roll Cage Project Full.

**Gene** · 11-02-06, 07:03 AM

Originally Posted by BurnTire

So you are doing the wolf bar?

Next time I'm in texas I'm bringing it home with me

**RockysMom** · 11-02-06, 07:59 AM

Originally Posted by BurnTire

I weight a buck 65.

There is no way, I need proof of this, sheesh

**BurnTire** · 11-02-06, 10:55 AM

Originally Posted by MinGry03

Hey Jeff, I thought the harness needed to fastened to the floor not the roll bar?

Nope to the cross bar is the correct way.

**MinGry03** · 11-02-06, 04:58 PM

Originally Posted by RockysMom

There is no way, I need proof of this, sheesh

Check here....

http://www.highperformancestangs.com...ead.php?t=1031

**BurnTire** · 01-01-07, 10:48 PM

To keep the tech Nazis Happy

**Lucafu1** · 01-02-07, 06:59 PM

where did you get that at?

**BurnTire** · 01-02-07, 07:09 PM

It is a wolf race craft crotch strap bracket I wasn't using. I had to fab up the spacers between the bracket and the cross bar. NHRA said drilling the holes into the cross bar is fine as long as you have a sleeve around the bolt to prevent the cross bar from crushing or use a nut with nylon and don't over tighten the bolt.

**Lucafu1** · 01-03-07, 07:30 PM

nice work!

**BurnTire** · 01-03-07, 07:36 PM

If I ever put a racing seat in the car I will fab up something that uses the bottom of the bolts to secure the back of the seat to the cross bar. The stock seats are a little too high. I find my head against the roof at times with my helmet on.

**Dan** · 01-03-07, 08:25 PM

they said that?

Thread: Clutch and Roll Cage Project Full.

Thread Tools

Display

Final Ad On

Posting Permissions