i'm looking for a good deal on a forged 4.6 2V shortblock. no higher than stock compression. let me know what you have. 602-571-2399 Josh
Results 1 to 6 of 6
Thread: WTB: "built" 4.6 shortblock
-
01-09-12, 08:47 PM #1Junior Member
- Join Date
- Nov 2006
- Location
- phoenix,az.
- Posts
- 25
WTB: "built" 4.6 shortblock
Last edited by showoff; 01-10-12 at 02:11 PM.
-
01-10-12, 01:53 PM #2Senior Member
- Join Date
- Aug 2011
- Location
- Tempe, AZ
- Posts
- 113
stock compression for a 2V or 4V? Due to head differences they take different style pistons to achieve stock compression. So it depends what heads your putting on it. But depending what you need, I may have one at the shop here.
-
01-10-12, 02:12 PM #3Junior Member
- Join Date
- Nov 2006
- Location
- phoenix,az.
- Posts
- 25
sorry, 2V
-
01-10-12, 02:53 PM #4Senior Member
- Join Date
- Aug 2011
- Location
- Tempe, AZ
- Posts
- 113
alright, unfortunately the one we already have built is for a 4V. Whats your budget? Maybe we can put one together for you....
-
01-10-12, 03:30 PM #5Junior Member
- Join Date
- Nov 2006
- Location
- phoenix,az.
- Posts
- 25
what would the compression be on that 4v with 2v heads? i'm running a turbo.
-
01-10-12, 04:35 PM #6Senior Member
- Join Date
- Aug 2011
- Location
- Tempe, AZ
- Posts
- 113
Corrected: with 2V heads the compression would be about 10.4:1. About 9.5:1 with a 4V heads. So a little too high for a turbo setup.
Last edited by PapaVolume; 01-11-12 at 11:25 AM.
