Okay, I promised photos, and I'm finally delivering ...
As I said above, the urethane mask is completely invisible, except from behind. Even then, you see only the line formed by the thickness of the material, which is sitting on the paint, and Mike cut that edge as an arc that trails back from the center of the hood to the fenders, so it looks pretty good, even when you can see it.
By the way, I've had the Xpel headlight film on the head and fog lights for about 3 years, now. And that material still looks as good as the day I applied it, so I'm sure the paint film will also be very durable.
Great job, SmartShield! Thanks again.
Results 1 to 9 of 9
Thread: Tim - need estimate please
Threaded View
-
01-14-12, 02:28 PM #7Junior Member
- Join Date
- Aug 2007
- Location
- Gilbert, AZ
- Posts
- 22
Photos
Last edited by Taz; 01-14-12 at 02:37 PM.
'01 Cobra ragtop w/ a few bolt-ons
KB blower w/ IC & Big Oval TB ** KB F1050 pump ** JBA's ** FRPP FW-clutch-PP ** 00R T56 ** PST C/F DS ** FRPP gears & pinion flange ** Torsen T2R diff ** PHP & BilletFlow braces ** DSS L5's ** Baer 2-pc rotors ** Russell lines & bleeders ** Brembo & FRPP pads ** Extreme Matrix chassis pieces ** EP springs ** Bilsteins ** FRPP front LCA's ** Steeda X2's ** F/R bumpsteer kits ** all poly bushings in back ** BBS RK's ** much more ...
Reply With Quote