Installing longtubes and k member. What other parts needed?

[SuperDust22]

I am going to get the longtubes, prochamber and pa racing kmember on the car here soon. What other little parts will I need? The kmember came with nothing but the kmember itself. The headers didn't come with any gaskets. What are all the other little parts I need. What wanting to make sure I have everything before I rip into it.
Dustin

[Dan]

that is sad it should have came with everything

[50 BMG]

Gaskets, Breslin (it's a brand) locking header bolts, A-Arm bushings (delrin/urethane usually works), Grade 9 or + hardware for anything fastening the suspension, good ball joints, rack nuts if PA doesn't include them and probably a few others I'm forgetting...

Post a pic of that K, I've never seen one off the car.

[SuperDust22]

Gaskets, Breslin (it's a brand) locking header bolts, A-Arm bushings (delrin/urethane usually works), Grade 9 or + hardware for anything fastening the suspension, good ball joints, rack nuts if PA doesn't include them and probably a few others I'm forgetting...

Post a pic of that K, I've never seen one off the car.

By any chance do you have any of this stuff in stock down at your shop? Or can order it?

Dustin

[50 BMG]

By any chance do you have any of this stuff in stock down at your shop? Or can order it?

Dustin

Call parts, ask for Dustin.

602-269-0029

[SuperDust22]

Gaskets, Breslin (it's a brand) locking header bolts, A-Arm bushings (delrin/urethane usually works), Grade 9 or + hardware for anything fastening the suspension, good ball joints, rack nuts if PA doesn't include them and probably a few others I'm forgetting...

Post a pic of that K, I've never seen one off the car.

Ill get a picture of it for you.

Dustin

[SuperDust22]

Here are the pictures of the PA racing unit










Also going on the car.


Dustin

[SuperDust22]

Okay so I have
2 Rack bolts 5.5 inches long 1/2 diameter
2 Rack washers
2 Rack nuts
Locking header bolts
Smaller Oil Filter (still need to find the part # on that)
Header Gaskets (maybe I heard they were MLS so can be reused.)
Are those the correct size bolts for me. Remenber I am using stock control arms and spings (not coilovers)
Also do I need new a arm bushings?
Thanks for all your help guys
Dustin