I'm heading to SW around 6:30pm to retest the bottle tonight. After having the soleniod fail last weekend on the first pass I'm lucky I didn't hurt the motor. So we replaced the soleniods and plugs this week, then retested it on the dyno. Everything looks good, it made @ 360hp & 460ftlb today, I'm hoping to hit the low 12's tonight.
Results 1 to 10 of 19
Thread: going to SW to retest the bottle
Hybrid View
-
11-25-06, 05:39 PM #1Senior Member
- Join Date
- Jun 2006
- Location
- PHX AZ
- Posts
- 701
going to SW to retest the bottle
-
11-25-06, 07:22 PM #2Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
good luck man! i was gonna head out, but after a long ass day of dealing with crappy i-17 traffic, and shooting at table mesa road, i am cooked. let us know how it goes!!
-
11-26-06, 06:28 PM #3Senior Member
- Join Date
- Jun 2006
- Location
- PHX AZ
- Posts
- 701
Well do to me being a
dumb@$$, I thought I toasted the motor last night. They staged me with a full on race car
that was so loud I couldn't hear or feel what my Mach was doing. Being a IDIOT I sprayed it against him when I should have just run on the motor and sprayed it on the next pass. During that run something went wrong and I thought the motor was history, so I had it trailered (thanks Seth and everyone else who helped) to the shop. I changed the plugs and Devin checked the cylinder with a bore scope everything looks good
. Devin took it for a test drive and said that it runs like a bat out of hell on the motor. So once again I was very lucky
. I'm going to change a few thing in the car, then head to the track and try it again. On the first pass I went 12.8@98mph letting off a couple hundred feet early. On the next pass it went 12.7@112 spinning badly, I think it'll run pretty good once I can make it hook.
-
11-26-06, 06:37 PM #4Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
what did it do that made you feel like it let go? mark had posted that a mach lost a motor on the bottle, and the first thing i said was...oh my. i hope its not a black mach 1. glad to hear its ok though, sounds like one scary night....allmost makes me glad i stayed my lazy arse at the house and tinkered on the cobra...
-
11-26-06, 07:15 PM #5Senior Member
- Join Date
- Jun 2006
- Location
- PHX AZ
- Posts
- 701
Yeah he was more then likely talking about me. When we put it on the trailer it didn't sound good. But it looks like I might be lucky, I'll know more after a coulpe days of driving.
-
11-26-06, 07:21 PM #6Senior Member
- Join Date
- Jun 2006
- Location
- PHX AZ
- Posts
- 701
[quote=AZSonicSnake;10632] mark had posted that a mach lost a motor on the bottle, and the first thing i said was...oh my. i hope its not a black mach 1. glad to hear its ok [quote]
where
-
11-26-06, 08:10 PM #7Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
was on 1320stangs. so probably not many people saw it. lol.
Reply With Quote
