Results 1 to 3 of 3

Thread: Granda disk brake setup

  1. #1
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586

    Granda disk brake setup

    Hey fellas, I have a Granada disk brake setup that I put together a few years ago and never used.. the kit is 90% complete. I think(its been a long while) everything except the spindles is new.. The rotors although new have some surface rust on them than can be buffed off.. the wheel bearings and seals are new, the brake pads are new semi metallics and the calipers are rebuilt units.. I don't know what the going price is for this stuff.. like i mentioned its been a while.. i put this kit together when i was putting together my 64 Fairlane that never came to be..

    list of parts:
    1 left spindle
    1 right spindle
    2 disk brake rotors (new w surface rust)
    2 inner bearings
    2 outer bearings
    2 grease seals
    1 right caliper
    1 left caliper


    If interested please make a fair offer.. I will also do some research as to what this stuff is worth.. thanks




  2. #2
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586
    Just in case, it was also brought to my attention, This is what some use to convert the early mustangs and other 60's ford to disc brake.. at one point this was the hot ticket.. just a little FYI.
    I'm sure no one here has a granada... a fairmont maybe ...

  3. #3
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586
    Sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •