I am looking for a better window switch option than the OEM. I think I have found a couple of rocker switches that will work. I am going to move the fire pulls back to the rollbar then add a on off on switch with two LED's one for transbrake and one for lineloc. Plumcrazy turned me on to the setup. With the switch, the LED will indicate which one is active for the shifter button.
The black material is ABS. Once I get the panels and switches right I will replace them with actual carbon fiber like I have with the current switch. Would love to hear suggestions.
Results 1 to 10 of 233
Thread: 2004 Pontiac GTO!
Hybrid View
-
01-27-13, 11:46 PM #1Senior Member
- Join Date
- May 2010
- Location
- Texas
- Posts
- 196
-
01-29-13, 08:06 PM #2Senior Member
- Join Date
- May 2010
- Location
- Texas
- Posts
- 196
Startup
-
02-06-13, 09:30 PM #3Senior Member
- Join Date
- May 2010
- Location
- Texas
- Posts
- 196
Taken about a week to figure out the throttle stuff. I turned the TB 90 degrees and made a bracket to run it in from the side. Took some monkeying around to get it where it would give me 100% but I think I am there.
Went from this
To this
Had to douche the return spring, still working on that one. So afterwards took her out for a spin. Not inspected so tried to keep it reasonable.
Short Launch
Reply With Quote