Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Meguiars Water Magnet

Hybrid View

  1. #1
    Member
    Join Date
    Jun 2007
    Location
    Queen Creek
    Posts
    65
    Hi Folks, just thought I'd share a few thoughts on the subject. I own Infinite Detail, a detailing outfit specializing in paint correction and show car preparation and maintenance. Here's a few tips for you black car owners:

    1. Use only high quality, name brand microfiber towels on your paint. Dedicate towels to paint ONLY - no wheels, glass, engine, etc for those towels.

    2. Do not use heat to dry Microfiber towels! The fibers become rigid and can scratch. Air dry only. No fabric softener either!

    3. If your car is dusty, wash it instead of using a quick detailer. Quality microfiber towels won't scratch your paint, but dust will! Washing is the safest way to remove dust or dirt.

    4. We do not recommend a california duster. You are dragging scratchy dust particles across your paint and you will scratch it.

    5. The proper way to remove *light* dust with quick detailer is to (a) evenly mist the dusty panel or area with QUick Detailer, (b) lightly prime 1 surface of your high quality MF towel with QD, then very lightly remove the QD from the panel you just sprayed. Then, flip to the dry side of the towel and do a very light final wipe. Wipe as lightly as possible!

    Follow these steps and your black paint will look great for much longer between polishes.

    Good luck!
    68 Hardtop
    "Kandi Taylor"

  2. #2
    Member fdkirkland's Avatar
    Join Date
    Aug 2011
    Location
    Phoenix
    Posts
    36
    Good tips but this means I got to wash my car every day. The dust is unbelievale. I was just looking mine over for the all Ford show. I washed and waxed it last Saturday, went to the Pavilions on Saturday night and then put it in the garage all week and it's covered with dust. I really didn't want to wash it again for tomorrow's show.

    Okay, 'nuff bitchin'. What do you use to get the swirls out?
    Real friends don't let friends race Camaros

  3. #3
    Member
    Join Date
    Jun 2007
    Location
    Queen Creek
    Posts
    65
    Sorry about that dust, you just have to live with it unless you want alot of swirls. We recommend to our clients to avoid dusting their cars every 10 minutes at car shows. If you must dust, use QD liberally as I explained previously and you'll do alot less damage.

    To get the swirls out, we use a variety of products. The best off the shelf product is Meguiar's Ultimate Compound, if you follow the directions you'll get good results. It may not be strong enough to get out all of the scratches though - if not, hire a pro :-D The pro will tell you what machine/product/pad combination you need to use to maintain the finish.
    68 Hardtop
    "Kandi Taylor"

  4. #4
    Senior Member WildBill's Avatar
    Join Date
    Mar 2009
    Location
    Phoenix, DFW or a trailer at the track
    Posts
    944
    Black sucks to maintain, but can make a detailer shine.
    I reworked a black Cobra last week as a big favor. I did a bit of paint correction in a few areas and just a two step buff and topped it off with a new consumer product. The owner has had the car since new in 02 and he almost cried when he first saw the car. He said it has never looked that good. Pretty funny since it really wasn't a "Wild Bill" full on effort.
    More tips for black.
    1. When washing, use the two bucket method!
    2. HIGH quality microfiber is a must! No store in the area carries the quality needed in the valley that I know about. Cobra branded on Autotopia or Autogeek are excellent towels. Use the thickest and wash with microfiber detergent.
    3.Always use light force when drying or wiping off a sealant.
    4. Take the car to a Pro once a year!
    WILD BILL
    PRO-AMERICAN

    TorchRed 2003 MACH1 (Louise)
    "I remember my fallen brothers so that they may live on."
    ΜΟΛΩΝ ΛΑΒΕ

  5. #5
    Senior Member BLK03SVT's Avatar
    Join Date
    Nov 2006
    Location
    Scottsdale
    Posts
    750
    Platinum Award 
    I've become a huge fan of Adams detailing products. I especially like their microfiber towels. Even though a single doublesoft towel runs around $14 it is WAY worth it. I bought a few of these along with the single soft and they work perfectly.

    http://www.adamspolishes.com/p-494-a...ber-towel.aspx

    I can tell you to avoid the cheap microfiber towels from target/autzone etc. Under bright halogen lights I could actually see them fine scratch my paint on my 03. Not good!

    For swirls this stuff worked great:

    http://www.adamspolishes.com/p-97-ad...er-polish.aspx

    2011 Shelby GT 500
    Black/Black/Satin Black Stripes, Electronics Pkg, FRPP/BMR Suspension/Borla-Ford Racing Exhaust
    488rwhp/463rwtq bone stock
    Great Past Rides:
    2003 Mustang Cobra SVT Convertible- 302 Stroker & more- PSR Tuned, 2003 Mustang GT- Silver Coupe w/boltons
    1996 Mustang GT/SC- Paxton SC & Tons of Mods- SuperFord Mag Car, 1995 Mustang- Red w/boltons. 1968 Galaxie 500

  6. #6
    Senior Member El Jefe's Avatar
    Join Date
    Mar 2006
    Location
    Tucson
    Posts
    840
    You guys need to pick up some of the 3D trim care: http://www.3dproducts.com/Trim-Care-Protectant.html

    I used it 2 weeks ago on my wiper cowl and under hood trim and it is still shining. Brings black plastic back to life
    04 Screaming Yellow Cobra 463rwhp/456tq
    74 Bronco 302/C4


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •