I have a maximum motorsports k member and have always jacked under the center of it for oil changes. well, somehow the jack slipped and the car came down on it, there is about an inch to an inch and a half intrusion. After cussing a storm, I tried to start it to see if the crank was rubbing on the pan. Sure enough, heard a faint tick and stopped it. I'm guessing thats what's causing the tick right? Or could I have caused more damage? Fawk, i'm so pissed. Might as well throw in a 7 qt mmr pan while I'm at it. I'm stupid I know, but shit happens to the best of us. Oh yeah, I bent the piss out of the front power stearing line as well. I hope they sell the line instead of me having to buy a whole rack and pinion. Any thoughts on potential damage to the crank or engine?
Results 1 to 10 of 10
Hybrid View
-
08-03-10, 02:25 PM #1Super Moderator
- Join Date
- Dec 2005
- Location
- Phoenix
- Posts
- 1,224
Help! jack slipped & crushed oil pan
-
08-03-10, 04:28 PM #2Senior Member
- Join Date
- Mar 2006
- Location
- Tucson
- Posts
- 840
-
08-03-10, 04:43 PM #3Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Pull the pan and see what you did. Hard to say at this point. That faint tick may have always been there.
I roll onto gray Rhino Ramps to change my oil.Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
08-03-10, 04:56 PM #4Super Moderator
- Join Date
- Dec 2005
- Location
- Phoenix
- Posts
- 1,224
Had the ramsp out, they were just not getting traction. This sucks man, at least I was smart enough not to be under it. Here are the pics.
-
08-03-10, 05:02 PM #5Super Moderator
- Join Date
- Jul 2006
- Location
- Mesa, Az
- Posts
- 4,443
Ouch, crap..... Yeah pull the pan, dont risk it....
"The choices we make, dictates the lives we lead"
-
08-03-10, 05:24 PM #6Senior Member
- Join Date
- Sep 2009
- Location
- phoenix az
- Posts
- 484
that really bites the big one dammmmm it
-
08-03-10, 06:54 PM #7Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Damn that sucks.
-
08-03-10, 07:15 PM #8Senior Member
- Join Date
- Jan 2009
- Location
- Phoenix
- Posts
- 948
gene
RPM has a good deal on canton that is what i use and then while it is down do the windage tray as well 9the screaned one not the factory one
-
08-03-10, 08:36 PM #9Super Moderator
- Join Date
- Dec 2005
- Location
- Phoenix
- Posts
- 1,224
Dan, I bought the MMR 7qt since I've heard people having to beat and mold the canton to work with the hellion pipes. I just hope nothing is fubared in there. I'm about to drop the K. Just got the engine supported with my hoist bar.
-
08-03-10, 11:24 PM #10Member
- Join Date
- Jul 2010
- Location
- Arizona
- Posts
- 63
Damn dude that sucks! But like you said at least you were under it!! Hope its only the pan and nothing to major.
Reply With Quote