what kind of gains could someone expect to see with just the eaton, pulley, intake, exhaust ( no port )
what kind of gains could someone expect to see with just the eaton, pulley, intake, exhaust ( no port )
2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
hp normally will be between 440-475 RWHP depending on the condition of your motor and how well the parts work together not too bad seeing as how most of these cars are around 360HP at the rear wheel
2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
you couldnt because the fuel system is already maxed at that level. and the run E85 you will need about 33% more fuel and your ffacctory system can not suport that in stock form
your stock pumps are good for about 485 and the filer is good to about 500 because of flow due to size of the inlet and out let of the filter. now if you were to change to a larger fuel filter you sould possable streatch it to about 560 with a boost a pump and changed fuel filter however that is not a proven number because most of us changge the entire fuel system at that point
I ran stock pumps, stock filter, stock fuel lines, BAP, and 60lb injectors for 3 years making 625 RWHP.
90%-95% duty cycle at 6500 RPMs depending on fuel and tune. I shift at 6000 so I was around 90% at the track.
Now I have twin GT Pumps, MGMjr, -8 line, stock rails. Now 75%-80% duty cycle depending on fuel and tune.
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
man for a moment i thought thiswas a thread about the killer wallet cheater
I didnt know this was a thread about tuning.