Results 1 to 9 of 9

Thread: Starter Solenoid Issue...

Hybrid View

  1. #1
    Member 89GT's Avatar
    Join Date
    May 2010
    Location
    Surprise
    Posts
    33

    Question Starter Solenoid Issue...

    I went to start the stang today and the starter kept cranking the engine and would not stop without disconnecting the battery cable... I tried taking off the ignition wire on the solenoid, but it still cranked. Measured the Ohms between both terminals and obviously it had welded itself. Went to Autozone, replaced the solenoid. Maybe 5 starts and it does it again, welded inside again... I picked up a solenoid from Carquest, and it has been working so far. My question is, what causes this? The car has a new starter also. I see everyone in other forums converting to the 94-96 (i think) starters... I just don't see the point of changing something that was engineered to be this way from the factory, and obviously, I am not looking to buy a new starter when I have one already... I have also read that the Ford solenoids are better quality, I am not surprised the VatoZone ones went to crap so quick...So, I am asking opinions, is it really necessary to convert to the newer style starter? Should I just go to ford and get a factory solenoid? Enlighten me Please!
    89 Gt
    E303 cam (I think)
    Sub-frame connectors
    I think it has a port job
    Might be re-geared
    Set up for nitrous (police removed it)
    Give me a break, it was from an impound lot, It's quick that is all I know.

  2. #2
    Super Moderator 4Jenna's Avatar
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    1,939
    Platinum Award 
    Sounds like it might be a wiring issue.

    No it's not ness to swap to a newer starter that has the solenoid on the starter.
    JENNABEARS Foundation
    www.jennabearsfoundation.org

  3. #3
    Senior Member DVSRICK's Avatar
    Join Date
    Mar 2008
    Location
    Phoenix , AZ
    Posts
    251
    Sounds definitly like a wiring issue. you shouldnt have to change the starter. I would check for any bad groundes or wires that have fussed themselves by all the hot spots.

    93 FOX

  4. #4
    Member 89GT's Avatar
    Join Date
    May 2010
    Location
    Surprise
    Posts
    33
    Nice Fox by the way!
    89 Gt
    E303 cam (I think)
    Sub-frame connectors
    I think it has a port job
    Might be re-geared
    Set up for nitrous (police removed it)
    Give me a break, it was from an impound lot, It's quick that is all I know.

  5. #5
    Senior Member DVSRICK's Avatar
    Join Date
    Mar 2008
    Location
    Phoenix , AZ
    Posts
    251
    Quote Originally Posted by 89GT View Post
    Nice Fox by the way!
    Ya its my turd and never ending prodject

    93 FOX

  6. #6
    Member 89GT's Avatar
    Join Date
    May 2010
    Location
    Surprise
    Posts
    33
    When I got the car it already had a new starter. I'm guessing the solenoid from autozone was a bad one cause the one from carquest has been working with no issues... hmm
    89 Gt
    E303 cam (I think)
    Sub-frame connectors
    I think it has a port job
    Might be re-geared
    Set up for nitrous (police removed it)
    Give me a break, it was from an impound lot, It's quick that is all I know.

  7. #7
    Junior Member swirl's Avatar
    Join Date
    Aug 2006
    Location
    Chandler
    Posts
    20
    they had a recall on ignition switches so it could be that
    89 GT Single turbo, 42lb injectors, 70mm throttle body, custom heads....rest is a secret..lol
    92 Notch Hellion turbo kit, 306, gt40y heads, lots more

  8. #8
    Member 89GT's Avatar
    Join Date
    May 2010
    Location
    Surprise
    Posts
    33
    I was thinking that too, but it has been great for over a month now. It would crank even with the ignition signal wire disconnected... not a fun ordeal
    89 Gt
    E303 cam (I think)
    Sub-frame connectors
    I think it has a port job
    Might be re-geared
    Set up for nitrous (police removed it)
    Give me a break, it was from an impound lot, It's quick that is all I know.

  9. #9
    Junior Member swirl's Avatar
    Join Date
    Aug 2006
    Location
    Chandler
    Posts
    20
    with the signal wire diconnected and it still starts then its the solenoid
    89 GT Single turbo, 42lb injectors, 70mm throttle body, custom heads....rest is a secret..lol
    92 Notch Hellion turbo kit, 306, gt40y heads, lots more

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •