Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: Clutch and Roll Cage Project Cliff Note Version

  1. #11
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619

    Final Ad On

    To keep the tech Nazis Happy

    Last edited by BurnTire; 01-02-07 at 07:09 PM.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  2. #12
    Senior Member Lucafu1's Avatar
    Join Date
    Dec 2005
    Location
    Tucson
    Posts
    542
    Gold Award 
    where did you get that at?

  3. #13
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    It is a wolf race craft crotch strap bracket I wasn't using. I had to fab up the spacers between the bracket and the cross bar. NHRA said drilling the holes into the cross bar is fine as long as you have a sleeve around the bolt to prevent the cross bar from crushing or use a nut with nylon and don't over tighten the bolt.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  4. #14
    Senior Member Lucafu1's Avatar
    Join Date
    Dec 2005
    Location
    Tucson
    Posts
    542
    Gold Award 
    nice work!

  5. #15
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    If I ever put a racing seat in the car I will fab up something that uses the bottom of the bolts to secure the back of the seat to the cross bar. The stock seats are a little too high. I find my head against the roof at times with my helmet on.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  6. #16
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619

    Harness Mount Rules


  7. #17
    Junior Member autoxstang's Avatar
    Join Date
    Mar 2007
    Location
    Savannah, GA
    Posts
    27
    Quick question. Can you completely remove the swing outs or are they fixed to the bottom of the car?

    2004 Redfire Cobra, #583/3768, Born 11/26/03
    2.8 KB numbers coming soon....

  8. #18
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    You can completely remove them.
    Attached Images Attached Images  
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  9. #19
    Junior Member autoxstang's Avatar
    Join Date
    Mar 2007
    Location
    Savannah, GA
    Posts
    27
    Awesome bro!! I really like your setup. I may model my car after yours if you don't mind

    2004 Redfire Cobra, #583/3768, Born 11/26/03
    2.8 KB numbers coming soon....

  10. #20
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Quote Originally Posted by autoxstang View Post
    Awesome bro!! I really like your setup. I may model my car after yours if you don't mind
    I don't mind.
    Nothing custom about mine. It is the Maximum Motorsports Roll Bar with Swingouts.

    Just make sure you get a tab welded to bolt the harness to the cross bar or weld on a bracket to prevent them from sliding on the cross bar if you wish to wrap them around. I wish I knew that before I did mine, but I found an acceptable solution without killing the powder coat.

    I just ordered the Corbeau TRS seats. I test fitted at set and they work with the swingouts. I feel they are safer because they have shoulder and crotch belt holes in them and a little weight reduction never hurts.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •