Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Pulling right...

  1. #1
    Member Tac2cul's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    82

    Pulling right...

    Hey all..... ever since i bought the stang shes pulled right..

    Alignment shops says its within specs....

    What i have...

    01 GT with Eibach pro kit and Eibach Anti roll kit with 18" 2000 Cobra R rims no cast/camber plates ( have some just havent put em on) no bump steer kit installed but may get one in the future. This doesnt happen when i hit a bump either...she just goes right period....

    Its not a slight pull i let go and she goes right pretty bad no matter what road on im...groved or not...

    Heres what i checked...

    Rims/Tires... Rims/Tires have been rotated and still same issue.(new tires)
    Front wheel bearins seem tight no movement either way.... Also at 55 i have a wobble in the steering wheel but goes away at higher speeds (rotation of tires doesnt help)

    heres the specs from the last alignment shop they did say i needed plates

    http://www.tac2cul.net/Front%20Left.xml

    think cast/camber plates will fix this?

    Also any ideas about the wobble in the wheel at 55?
    01 Mustang GT

  2. #2
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    Something is wrong. The wobble is strange. You may want to call Lees Alignment Shop. 602-275-0104. They have experience with lowered mustangs.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  3. #3
    Member Tac2cul's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    82
    Thanks bud..

    shop i took it to i have used for years Network Alignment and they have done many a lowered vehicles....

    just thought someone with some alignment knowledge could look at the numbers and see if its off enuff it would cause to pull right..

    but doesnt hurt to get a 2nd opinion either
    01 Mustang GT

  4. #4
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    The guys from Lees are always at the drag strip and own a few mustangs. Give them a call maybe you could email the log to them and see what they have to say.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  5. #5
    Member
    Join Date
    Dec 2005
    Location
    Payson, AZ
    Posts
    83
    Just a hunch, but you might take a look at your rack bushings.
    00 Atlantic Blue GT, Vortech Supercharged, 03 Cobra IRS, Griggs GR40 front suspension.
    11.66 @ 116 and 1.03 lateral g's

  6. #6
    Member Tac2cul's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    82
    Thanks guys for your thoughts and suggestions

    ive thought about the rack bushings but never checked em out and now winter is coming im more inclined to get all the bugs worked out of the GT
    01 Mustang GT

  7. #7
    Senior Member 50 BMG's Avatar
    Join Date
    Dec 2005
    Location
    AZ
    Posts
    770
    Gold Award 
    Are you the original owner?

  8. #8
    Member Tac2cul's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    82
    Quote Originally Posted by 50 BMG View Post
    Are you the original owner?
    nope

    pro kit and rims were on it b4 i bought it i added anti roll and new tires

    the car did it when i bought it.... thought it was the tires..were pretty crappy so i bought new ones a month after i bought it and have just delt with it
    01 Mustang GT

  9. #9
    Senior Member 50 BMG's Avatar
    Join Date
    Dec 2005
    Location
    AZ
    Posts
    770
    Gold Award 
    Quote Originally Posted by Tac2cul View Post
    nope

    pro kit and rims were on it b4 i bought it i added anti roll and new tires
    Car ever been wrecked?

  10. #10
    Member Tac2cul's Avatar
    Join Date
    Jun 2006
    Location
    Phoenix
    Posts
    82
    according to carfax....nope
    01 Mustang GT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •