Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 302 Parts for a 260?

Hybrid View

  1. #1
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622

    302 Parts for a 260?

    I have a new project coming my way and have a chance to pick up a 260 motor basically complete with the 5 bolt cruise-o-matic tranny. My question is will a 69 302 intake, cam, hydraulics, blah blah blah work for this 260? I am more so interested in knowing if the intake would work as i have an original iron intake with working/clean carburetor that would be nice to have. ~ Thanks in Advance.

  2. #2
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    Why do you want to go with a smaller engine?...didn't know Ford made a 260...

  3. #3
    Senior Member 93mustank's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix.AZ
    Posts
    398
    You can find a late model 5.0 roller block for 100-300....Why waste your time.

  4. #4
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586
    yes it will all fit but, IMO your taking a step back.. you should be shoving a roller 302 in there than that 260.. or were you just going to raid it for parts? either way its your car.. be careful with the corner intake bolts.. the 260 heads have no support at the edges and you can break off the ends of the manifold...

    is your 302 on its last legs?

  5. #5
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622
    Quote Originally Posted by Mr. Austin View Post
    I have a new project coming my way
    New project. My mustang is complete. I will not take a step back to a 260 as that is dumb. I have another project. A 260 is cheap and everyone has the 302 or 289 motor. I want different. I got myself a 32 rod. And no i dont want a flat head. Everyone has one of them too. Im doing something different on budget. And yes ford made a 260 in the early 60's. Comets and galaxies had them. Will a 302 manifold fit on top of the 260 tho? wont the 302 manifolds be stronger? Its cast Iron.
    Last edited by Mr. Austin; 02-11-10 at 09:00 PM.

  6. #6
    Senior Member SloSVO's Avatar
    Join Date
    Oct 2008
    Location
    Buckeye, Az
    Posts
    586
    the 302 manifold will fit... you'll see what i'm talking about when you install it.. thats assuming the 260 heads are stil on that motor..

  7. #7
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    I'm more familiar with the big block Fords from that era. I do recall a 260 now I thought about it for a while. If your looking to do something on a budget....it sounds like you have a good start. Good luck!!!

  8. #8
    Senior Member QuarterHorse's Avatar
    Join Date
    Jan 2007
    Location
    Buckeye, Arizona, United States, 107758105920000, Buckeye, Arizona
    Posts
    150
    hadn't heard it called "Butt Eye" before...that's a good one...lol. I've called it plenty of other names...

  9. #9
    Senior Member Mr. Austin's Avatar
    Join Date
    Apr 2008
    Location
    Peoria
    Posts
    1,622
    Quote Originally Posted by SloSVO View Post
    the 302 manifold will fit... you'll see what i'm talking about when you install it.. thats assuming the 260 heads are stil on that motor..
    Hmm ok. Sweet. Maybe if i ca find some 302 heads ill throw them on the 260. I have a bunch of left over parts from my 302 and want to use them on the 260 i just didnt know if they would bolt up.

  10. #10
    Senior Member 93mustank's Avatar
    Join Date
    Nov 2006
    Location
    Phoenix.AZ
    Posts
    398
    So you wanna be different yet your throwing 302 stuff on a 260?

    Why not put a 302 in it and say its a 260?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •