Results 1 to 7 of 7

Thread: Clutch question

  1. #1
    Senior Member
    Join Date
    Jan 2010
    Location
    Peoria, Az
    Posts
    225

    Clutch question

    2003 GT, 5 speed with 23,000 miles. Over the last couple of days I have felt a slight vibration or knocking under the floor board at the pedals. I thought my H pipe might need to be tightened so I crawled under the car and checked it out. Everything was ok so I started looking around for any suspension stuff and all of that looked ok also. When I got home this morning and pulled into the garage I noticed a grinding noise, but when I pushed the clutch in it went away. If I release the clutch the noise comes back and you hear a slight click. Could the clutch being going bad already with only 23,000 miles? I don't drive it that hard, but I am afraid the previous owner may have. Any help would be great.

  2. #2
    Senior Member Wades GT's Avatar
    Join Date
    Mar 2009
    Location
    peoria
    Posts
    401
    Quote Originally Posted by scooter3 View Post
    2003 GT, 5 speed with 23,000 miles. Over the last couple of days I have felt a slight vibration or knocking under the floor board at the pedals. I thought my H pipe might need to be tightened so I crawled under the car and checked it out. Everything was ok so I started looking around for any suspension stuff and all of that looked ok also. When I got home this morning and pulled into the garage I noticed a grinding noise, but when I pushed the clutch in it went away. If I release the clutch the noise comes back and you hear a slight click. Could the clutch being going bad already with only 23,000 miles? I don't drive it that hard, but I am afraid the previous owner may have. Any help would be great.
    The clutch cable may need to be adjusted or replaced.
    http://wildwestmustangsaz.com/gallery/albums/userpics/EVIL SIG.jpg

  3. #3
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    Throwout bearing.
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  4. #4
    Super Moderator 4Jenna's Avatar
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    1,939
    Platinum Award 
    Quote Originally Posted by ASUSMC View Post
    Throwout bearing.
    JENNABEARS Foundation
    www.jennabearsfoundation.org

  5. #5
    Administrator BurnTire's Avatar
    Join Date
    Dec 2005
    Location
    Pittsburgh, PA
    Posts
    8,619
    The throwout bearing should not be spinning when the clutch pedal is released. Spinning all the time = premature bearing failure.
    Sold
    2004 Cobra, Whipple ,TH-400
    Burning Corn
    9.97 - 135.5

  6. #6
    Senior Member ASUSMC's Avatar
    Join Date
    Sep 2006
    Location
    Phoenix
    Posts
    1,663
    Going through that right now actually. Dropped the tranny out of my car yesterday and my TOB was in quite a few pieces. It had siezed itself to the output shaft
    2012 Race Red GT w/ a 5 Liter and a 6 speed
    2010 Dodge Challenger R/T traded in.
    '03 DBS Cobra .... Traded in, THANK GOD
    '01 Ford Lightning.... Sold, sorely missed

  7. #7
    Senior Member
    Join Date
    Jan 2010
    Location
    Peoria, Az
    Posts
    225
    Thanks for the replies. I will let it ride for now until I can find a shop that won't take me to the cleaners since I don't have the tools or knowledge to drop the tranny and check it out for myself.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •